User's Manual

Quick Installation Guide

EAP701 Enterprise Access Point ENGLISH

b) Align the Access Point to the 4 hooks and snap Access Point to the mounting plate

c) To detach Access Point from the mounting plate, insert the Unfastening Tool (provided)

horizontally into the slit, turn counter-clockwise and slide the Access Point towards the

unfastening tool:

Now, the Hardware Installation is complete.

 Punch down tools may vary by country. Please contact the 4ipnet Support Team for

recommendations if needed.

 Please use only the power adapter supplied with the package. Using a different power adapter

may damage this system.

 To verify the wired connection between the AP and your switch / router / hub, please also check

the LED status indicator of the respective network devices.