User's Manual

Quick Installation Guide

EAP701 Enterprise Access Point ENGLISH

Hardware Installation

Please follow the steps mentioned below to install the hardware of EAP701:

Step 1. Place the EAP701 at the best location. The best location is usually at the center of your intended

wireless network. The EAP701 supports two types of mounting;

a) Surface Mounting Panel b) Outlet Mount Panel

a) Surface Mount: Mountable on any flat surface. You may choose to connect your uplink cable the slit on the side

or in through the back.

b) Wall Outlet Mount: This Wall Outlet mount can be fitted on any US standard outlet box.

Secure the mounting plate on the mounting surface by tightening the screws (included) at the

highlighted area below: