User Manual

© 2008 4IPNET, INC.
19
4ipnet
MSG
100
User
’
s
Manual
Ÿ System Name: Set the name of the system or use the default.
Ÿ Internal Domain Name: A fully qualified domain name (FQDN) of the system. The domain name entered here
will be shown at the top left of the Login Success page. In addition, when HTTPS is enabled, entering the
domain name of the uploaded certificate will not only change the URL of the User Login page, but also
increase login speed. For example, if the Internal Domain Name is configured as “ ashop.com” , the URL of the
User Login page will be https://ashop.com/loginpages/login.shtml.
Ÿ Homepage Redirect URL: Enter the URL of a Web server as the homepage. When Local VPN is disabled at
this system, after a successful login, users will be directed to this homepage, such as http://www.google.com,
regardless of the original homepage set in their computers.
Ÿ User Log Access IP Address: Specify the IP address of an external billing system to access the system's user
logs. Only the specified billing system can directly access the system's user logs in text format via a Web
browser. For example, if the access interface of MSG100 is “10.30.1.213”, the user logs can be found in
following URLs.
n Traffic History： https://10.2.3.213/status/history/2007-07-17
n On-demand History： https://10.2.3.213/status/ondemand_history/2007-07-17
Ÿ Management IP Address List: Set the IP range where the web management interface of MSG100 can be
connected via its WAN and/or LAN ports. For example, “192.168.1.0/24” means that as long as you are within
the IP range between 192.168.1.0 and 192.168.1.255, you can reach the management interface.
Ÿ SNMP: MSG100 supports SNMPv2. If this function is enabled, the specified SNMP server can access the
Management Information Base (MIB) of the system.