User Manual

© 2008 4IPNET, INC.
22
4ipnet
MSG
100
User
’
s
Manual
Ÿ PPPoE: Select this option when PPPoE is the connection protocol provided by your ISP.
To properly configure PPPoE connection type, set the Username, Password, MTU and Clamp MSS.
When Dial on Demand is enabled, the Maximum Idle Time field is required to be filled in. The system will
disconnect itself from the Internet automatically when the Maximum Idle Time is reached.
Ÿ PPTP: Select this option when PPTP is the connection protocol provided by your ISP.
When Dial on Demand is enabled, the Maximum Idle Time field is required to be filled in. The system will
disconnect itself from the Internet automatically when the Maximum Idle Time is reached.
There are two connection types available, Static or DHCP.
Ø Static: Select Static to specify the IP address of the PPTP Client manually.
Ø DHCP: Select DHCP to get the IP address automatically..