User Manual

4ipnet

MSG

100

User

’

Manual

4.4.3 System Upgrade

To upgrade the system firmware, click Browse to locate a new firmware file and then click Apply to execute the

upgrade process. It may take a few minutes before the upgrade process completes. Upon completion, the system

must be restarted for the new firmware to take effect.

8 Note:

Ÿ Firmware upgrade may sometimes result in data loss. Please ensure you read the release note

thoroughly before installing.

Ÿ Please restart the system after the upgrade. Do not interrupt the system, i.e. power on/off, during

the upgrade or restart process as this may damage the system.

Ÿ Current setting will not be altered after firmware upgrade.

4.4.4 Restart

This function allows the administrator to safely restart the system. The process shall take about three minutes. Do

NOT interrupt the restart process until it completes.

Click YES to restart the system. Please wait for the blinking timer to complete its countdown before accessing the

system web management interface again. Or click NO to go back to the previous screen.

All on-line users will be disconnected during reboot/restart.