User Manual

© 2008 4IPNET, INC.
92
4ipnet
MSG
100
User
’
s
Manual
Step 6: Select “ Connect using a broadband
connection that is always on” and then click
Next.
Step 7: Finally, click Finish to exit the
Connection Wizard. Now, the setup is completed.
2. TCP/IP Network Setup
By default, MSG100 will assign an appropriate IP address to a client PC configured to use DHCP to obtain IP
addresses automatically. However, you can also use a static IP to connect to MSG100 LAN port. The default
TCP/IP setting of Windows 95/98/2000/XP is “ Obtain an IP address automatically” . Please follow the steps
below to check the TCP/IP setting in a PC with Windows XP pre-installed.