User's Manual

4ip ne t WHG 301

Use r

’

s Ma nua l

3.1.3 Panel Function Descriptions

Front Panel

① LED:

There are four kinds of LED,

Power

Status

WAN

and

LAN

, to indicate different status of the system.



Power:

LED ON indicates power on.



Status:

While system power is on, status OFF indicates BIOS is running; BLINKING indicates the OS is

running, and ON indicates system is ready.



WAN:

LED ON indicates connection to the WAN port.



LAN:

LED ON indicates connection to the LAN port.

② WAN1/WAN2:

Two WAN ports (10 Base-T / 100Base-TX RJ-45) are available on the system.

③

LAN1~LAN8:

Client machines connect to WHG301 via LAN ports (10 Base-T / 100Base-TX RJ-45).

8 Note:

By default, all LAN ports are set with Port-based Default Service Zone; for Service Zone

configuration, please refer to

4.1.7. Service Zones

Rear Panel

① Reset:

Press this button to restart the system

② Console:

The system can be configured via a serial console port. The administrator can use a terminal

emulation program such as Microsoft’s HyperTerminal to login to the configuration console interface to change

admin password or monitor system status, etc.

③ Power Socket:

The power adapter attaches here.