User's Manual

© 2008 4IPNET, INC .
10
4ip ne t WHG 301
Use r
’
s Ma nua l
For the first time, if WHG301 is not using a
trusted SSL certificate
, there will be a
“Certificate Error”
,
because the browser treats WHG301 as an illegal website. Please press
“Continue to this website”
to
continue. The default user login page will then appear in the browser. For more information, please see
4.2.5
Additional Configuration
.
If you can’t get the login screen, the reasons may be: (1) The PC is set incorrectly so that the PC can’t
obtain the IP address automatically from the LAN port; (2) The IP address and the default gateway are not
under the same network segment. Please use default IP address such as 192.168.1.xx in your network
and then try it again. For the configuration on PC, please refer to
Appendix F.
4ipnet WHG301 supports three kinds of account interface. You can log in as
admin
,
manager
or
operator
. The
default usernames and passwords show as follows:
Admin:
The administrator can access all configuration pages of WHG301.
User Name:
admin
Password:
admin