User's Manual

© 2008 4IPNET, INC .
40
4ip ne t WHG 301
Use r
’
s Ma nua l
4.2.1 Authentication Configuration
This section is for administrators to pre-configure authentication servers for the entire system's Service Zones. For a
particular Service Zone, administrators can enable all the authentication servers which will be used and also specify
a default authentication server in the page of Service Zone Settings. Concurrently up to four servers can be selected
and pre-configured here by administrators from the five types of authentication databases (LOCAL, POP3, RADIUS,
LDAP, and NTDOMAIN). In addition, there are two servers (On-demand User and SIP) that are selected by the
system. For the Authentication Settings of each Service Zone, please see 4.1.7 Service Zones.
 Server Name: There are several authentication options supported by WHG301: Server 1 to Server 4,
On-demand User, and SIP. Click the hyperlink of the respective Server Name to configure the authentication
server.
 Auth Method: There are different authentication methods in WHG301: LOCAL, POP3, RADIUS, LDAP,
NTDOMAIN, ONDEMAND and SIP.
 Postfix: A postfix represents the authentication server in a complete username. For example, user1@local
means that this user (user1) will be authenticated against the LOCAL authentication database.
8 Note: Concurrently only one server is allowed to be set as Local or NTDOMAIN authentication method.

Group:
An authentication option, such as POP3 or NT Domain, can be set as a Group with the same QoS or
Privilege Profile setting.
For more information on Group, please refer to
4.2.3. Group Configuration.
After clicking
Apply
, there will be a restart message. You must click
Restart
to apply the settings.