User's Manual

4ip ne t WHG 301

Use r

’

s Ma nua l



Authentication Server Configuration

WHG301 provides four authentication servers and one on-demand server that the administrator can apply with

different policy. Click on the server name to set the configuration for that particular server. After completing and

clicking

Apply

to save the settings, go back to the previous page to select a server to be the default server and

enable or disable any server on the list. Users can log into the default server without the postfix to allow faster

Server 1~4:

There are 5 authentication methods,

Local User, POP3, RADIUS, LDAP

and

NTDomain,

to select

from.

Server Name:

Set a name for the authentication option by using numbers (0~9), alphabets (a~z or A ~Z),

dash (-), underline (_), space and dot (.) only. The length of this field is up to 40 characters. This name is

used for the administrator to identify the authentication options easily such as HQ-RADIUS.

Postfix:

A postfix is used to inform the system which authentication option to be used for authenticating an

account (e.g. bob@BostonLdap or tim@TaipeiRadius) when multiple options are concurrently in use. One of

authentication option can be assigned as default. For authentication assigned as default, the postfix can be

omitted. For example, if "BostonLdap" is the postfix of the default option, Bob can login as "bob" without

having to type in "bob@BostonLdap”. Set a postfix that is easy to distinguish (e.g. Local) and the server

numbers (0~9), alphabets (a~z or A~Z), dash (-), underline (_) and dot (.) within a maximum of 40

characters. All other characters are not allowed.

The Policy Name cannot contain these words: MAC and IP.

Black List:

There are 5 sets of black lists provided by the system. A user account listed in the black list is

not allowed to log into the system, the client's access will be denied. The administrator may select one black

list from the drop-down menu and this black list will be applied to this specific authentication option.

Group:

Select one Group from the drop-down list box for this specific authentication option.

Authentication Method:

Select Local from the drop-down list box and then click

Local User Setting

button

to enter the

Local User Settings

. Then, click the hyperlink of

Edit Local User List.

Enabling two or more servers of the same authentication method is NOT allowed.