User's Manual

© 2008 4IPNET, INC .
77
4ip ne t WHG 301
Use r
’
s Ma nua l
o Enable:
Check
Enable
box to activate this function or uncheck to inactivate it.
o Destination / IP Address:
The destination network address or IP address of the destination host.
Please note that, if applicable, the system will calculate and display the appropriate value based on the
combination of Network/IP Address and Subnet Mask that are just entered and applied.
o Destination / Subnet Netmask:
The subnet mask of the destination network. Select
255.255.255.255(/32) if the destination is a single host.
o Gateway / IP Address:
The IP address of the gateway or next router to the destination.

Schedule Profile:
Click
Setting
of Schedule Profile to enter the configuration page. Select
Enable
to show
the
Permitted Login Hours
list. This function is used to limit the time when clients can log in. Check the
desired time slots and click
Apply
to save the settings. These settings will become effective immediately
after clicking
Apply
.

Maximum Concurrent Session for User:
Include Maximum Concurrent Session for User, from 10 to
Unlimited. The concurrent sessions for each user, it can be restricted by administrator.
8 Note: For more information, please refer to Appendix E. Session Limit and Session Log.