User Manual

Cross Connections | 133
Configuring the traffic cross connections
Once you have configured the interface cards (see "Configuring the traffic interfaces" on page 77), you
can configure the traffic cross connections between compatible interfaces.
Compatible interfaces
Cross connections can be made between any compatible interfaces of equal data rates. Compatible
interfaces are shown in the table below:
Ethernet (management) Ethernet (user) QJET E1 Unframed QJET T1 Unframed QJET E1 Framed PCM 31 QJET E1 Framed PCM 30 QJET T1 Framed SF QJET T1 Framed ESF Q4EM voice only Q4EM with E&M QV24 with signalling DFXO DFXS HSS data HSS signalling
Ethernet (management)
9
Ethernet (user)
9
QJET E1 Unframed
9
QJET T1 Unframed
9
QJET E1 Framed PCM 31
99 9999999
QJET E1 Framed PCM 30
99 9999999
QJET T1 Framed SF
999999999
QJET T1 Framed ESF
999999999
Q4EM voice only
99999
Q4EM with E&M
9999 9 99
QV24 with signalling
9999 9
DFXO
9999 9 9
DFXS
9999 9 9
HSS data
9999 9
HSS signalling
9999 9