Product Manual

58 | Management
Aprisa SR+ Product Description 1.5.0
Configuring the Aprisa SR+ Radio Settings
The SuperVisor software enables operators to set the radio settings including:
TX Frequency
Sets the transmit frequency in MHz
TX Power
Sets the transmit Power in dBm
RX Frequency
Sets the receive frequency in MHz
Channel Size
Sets the channel size 12.5 kHz, 25 kHz or 50 kHz (depending
on variant)
Antenna Port Configuration
Sets the antenna port configuration to single port or dual
port
Modem Mode
Sets the modem / compliance for the radio
Modulation Type
Sets the fixed TX Modulation Type for the base station radio
ACM Control
Enables / disables Adaptive Code Modulation for the remote
to base direction of transmission (upstream)
Modulation Range
Sets the upper limit of the range that the base station will
recommend to the remote radios