Product Manual

Product Architecture | 71
Aprisa SR+ Product Description 1.5.0
Static IP Router
The Aprisa SR+ works in the point-to-multipoint (PMP) network as a standard static IP router with the
Ethernet and wireless / radio as interfaces and serial ports using terminal server as a virtual interface.
The Aprisa SR+ static router is semi-automated operation, where the routing table is automatically
created in the base station and populated with routes to all remotes and repeater stations in the network
during the registration process and vice versa, where the routing table is automatically created in remote
and repeater stations and populated with routes to base station during the registration process. Updates
occur when remote is disconnected from network for any reason, with the routing table updated in a
controlled fashion.
Also, in decommission operation, the base station routing tables are completely flushed allowing an
automatic rebuild. This avoids the user manually inserting / removing of multiple static routes to build /
change the routes in the network which might be tedious and introduce significant human error. The
Aprisa SR+ works as a static IP router without using any routing protocol and therefore does not have the
overhead of a routing protocol for better utilization of the narrow bandwidth network.
In addition to the semi-automated routes, the user can manually add / remove routes in the routing table
for the radio interface, Ethernet Interface and for routers which are connected to the radio network.
The Aprisa SR+ base station is used as a gateway to other networks. . Thus, a configurable IP address
default gateway can be set using a static route in the routing table with a destination IP address of the
destination network address. It is recommended to use a real network IP address (actual device IP) for the
gateway and not 0.0.0.0.
The Aprisa SR+ sub-netting rules distinguish between the wireless interface and the remote Ethernet
interface where RTUs are connected. The entire wireless network is set on a single IP subnet, while each
Aprisa SR+ remote’s Ethernet interface is set to a different subnet network. In this way, the user can
easily distinguish between the remotes subnet IP addresses.