User's Manual

230 | Alarm Types and Sources
Aprisa SR User Manual
Component Failure Alarms
Event ID
Event Display
Text
Default
Severity
Configuration
Type
Function
16
Component
Failure
major(2)
Not
Configurable
Alarm to indicate that a hardware
component has failed.
Diagnostic Alarms
Event ID
Event Display
Text
Default
Severity
Configuration
Type
Function
17
Protection Sw
Manual Lock
warning(4)
Not
Configurable
Alarm to indicate that the Protection
Switch Software Manual Lock has been
activated.
18
Protection Hw
Manual Lock
warning(4)
Not
Configurable
Alarm to indicate that the Protection
Switch Hardware Manual Lock has been
activated.
Software Alarms
Event ID
Event Display
Text
Default
Severity
Configuration
Type
Function
20
Calibration
Failure
major(2)
Not
Configurable
Alarm to indicate that the RF calibration
has failed.
21
Configuration
Not Supported
major(2)
Not
Configurable
Alarm to indicate that a configuration has
entered that is invalid.
32
Network
Configuration
Warning
warning(4)
Not
Configurable
Alarm to indicate a network configuration
problem e.g. duplicate IP address.
39
Software
Restart
Required
warning(4)
Not
Configurable
Alarm to indicate that a configuration has
changed that requires a software reboot.
Protection Alarms
Event ID
Event Display
Text
Default
Severity
Configuration
Type
Function
23
Protection Peer
Comms Lost
major(2)
Not
Configurable
Alarm to indicate that the standby radio
has lost communication with the active
radio.
54
Protection
Hardware
Failure
major(2)
Not
Configurable
Alarm to indicate that there is a failure in
the protection switch hardware.