User's Manual

174 | Managing the Radio
Aprisa SR User Manual
Protected Station
The majority of SuperVisor screens are the same for the standard radio and the protected station. The
following screens are specific to the protected station.
Parameter Errors
On protected station screens, parameter values displayed in red indicate discrepancies in common
parameter values between the primary and secondary radios (see ‘Protected Station: Terminal >
Summary’ on page 175 for an example of the red display). The value displayed is from the ‘addressed
radio’.
These value discrepancies can occur if the two protected station radios have been separately configured.
The discrepancies can be corrected by re-entering the values in one of the radios. The value will be
copied to the partner radio.