Mega-Pixel IP7138/IP7139 IP Sur veillance
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Table of Contents Overview ������������������������������������������������������������������������������������������������������������������������������������������������������3 Read Before Use �������������������������������������������������������������������������������������������������������������������������������������3 Package Contents ������������������������������������������������������������������������������������������������
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Overview VIVOTEK IP7138/7139, equipped with a 1.3M-pixel (1280x1024) CMOS sensor, is a professional network camera offering higher resolution of video for detail remote monitoring and indoor surveillance applications. Embedded with VIVOTEK VVTK-1000 SoC, it is able to deliver dual streams with different resolutions and video qualities upon different devices simultaneously such as computers or 3G cell phones for real-time monitoring.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Physical Description Front panel Antenna Manual Focus Ring MIC Internal Ring Screw Rear panel Antenna MIC In Indented Reset Button Ethernet 10/100 RJ45 Socket Power Cord Socket Audio Out General I/O Terminal Block Upper cover Status LED CF card slot CF Card Slot 4 - User's Manual
VIVOTEK - A Leading Provider of Multimedia Communication Solutions General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below. Pin 1 2 3 4 Name Digital output Digital input DC power Ground Status LED The color of LED indicates the status of the Network Camera.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Installation Network deployment Setup the Network Camera over the Internet This section explains how to configure the Network Camera to an Internet connection. 1. If you have external devices such as sensors and alarms, make the connection from the general I/O terminal block. 2. Connect the camera to a switch via Ethernet cable. 3. Connect the supplied power cable from the Network Camera to a power outlet.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions WAN (Wide Area Network ) Internet Router IP address : from ISP POWER COLLISION 1 2 3 4 5 IP address : 192.168.0.3 Subnet mask : 255.255.255.0 Default router : 192.168.0.1 LINK RECEIVE PARTITION LAN (Local Area Network) Router IP address : 192.168.0.1 Cable or DSL Modem IP address : 192.168.0.2 Subnet mask : 255.255.255.0 Default router : 192.168.0.1 2.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Set up the Network Camera through Power over Ethernet (PoE) (IP7138 only) When using a PoE-enabled switch The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet cable. If your switch/router supports PoE, refer to the following illustration to connect the Network Camera to a PoE-enabled switch/router.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Set up the Network Camera through Wireless Connection (IP7139 only) 1. Check the SSID currently set on your wireless access point (AP). 2. Go to IP7139's Configuration > Advanced mode > Wireless. 3. Type in the SSID consistent with the setting on your AP. 4. Select the Wireless mode as "Infrastructure". 5. Click Save. The Network Camera starts to reboot. 6. Wait for the live image to be reloaded to your browser.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN. 1. Install IW2 under the Software Utility directory from the software CD. Double click the IW2 shortcut on your desktop to launch the program. 2. The program will conduct an analysis of your network environment.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software. Using Web Browsers Use Installation Wizard 2 (IW2) to access to the Network Cameras on the LAN. If your network environment is not a LAN, follow these steps to access the Netwotk Camera: 1. Launch your web browser (ex.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera. For more information about how to enable password protection, please refer to Security on page 23. ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable your ActiveX® Controls for your browser. 1.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Using RTSP Players To view the MPEG-4 streaming media using RTSP players, you can use one of the following players that support RTSP streaming. Quick Time Player Real Player VLC media player 1. Launch a RTSP player. mpegable Player 2. Choose File > Open URL. An URL dialog box will pop up. 3.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet. For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 6. To utilize this feature, please check the following settings on your Network Camera: 1.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Using VIVOTEK Recording Software The product software CD also contains recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras. Please install the recording software; then launch the program to add the Network Camera to the Channel list. For detailed information about how to use the recording software, please refer to the user’s manual of the software or download it at http://www.vivotek.com.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Main Page This chapter explains the layout of the main page. It is composed of the following sections: VIVOTEK INC. Logo, Host Name, Camera Control Panel, Menu, and Live Video Window. Logo of VIVOTEK INC. Host Name Menu Live View Window VIVOTEK INC. Logo Click this logo to visit VIVOTEK website. Host Name The host name can be customized to fit your needs. For more information, please refer to System on page 21.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Live Video Window ■ The following window is displayed when the video mode is set to MPEG-4: MPEG-4 Protocol and Media Options Video Title Title and Time Time Video 14:01:59 2008/12/15 Video and Audio Control Buttons Video Title: The video title can be configured. For more information, please refer to Video Settings on page 48. MPEG-4 Protocol and Media Options: The transmission protocol and media options for MPEG-4 video streaming.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Mute: Turn off the volume on the local computer. The button becomes the after clicking the Mute button. Audio On button Mic Volume: When the Mute function is not activated, move the slider bar to adjust the microphone volume at local computer. Mute: Turn off the clicking the Mute button. Mic volume at local computer. The button becomes Mic on button after Full Screen: Click this button to switch to full screen mode.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Client Settings This chapter explains how to select the stream transmission mode and saving options on the local computer. When completed with the settings on this page, click Save on the page bottom to enable the settings. Stream Options The Network Camera supports MPEG-4 and MJPEG dual streams. For more information, please refer to Video Settings on page 48. MPEG-4 Media Options Select to stream video or audio data or both.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions HTTP: This protocol allows the same quality as TCP protocol without needing to open specific ports for streaming under some network environments. Users inside a firewall can utilize this protocol to allow streaming data through. MP4 Saving Options Users can record the live video as they are watching it by clicking page. Here, you can specify the storage destination and file name.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Configuration Click Configuration on the main page will enter the camera setting pages. Note that only Administrators can access the configuration page. System This section explains how to configure the basic settings for the Network Camera, such as the host name and system time. It is composed of the following three columns: System, System Time and DI and DO.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions System Time Enable Daylight Saving Time: Select this option to enable daylight saving time (DST). During DST, the system clock moves one hour ahead. Note that to utilize this feature, please set the time zone for your Network Camera first. Then, the starting time and ending time of the DST is displayed upon selecting this option.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Security This section explains how to enable password protection and create multiple accounts. Root Password The administrator account name is “root”, which is permanent and can not be deleted. If you want to add more accounts in Manage User column, please apply a password for the “root” account first. 1. Type the password identically in both text boxes, and click Save to enable password protection. 2.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions HTTPS (Hypertext Transfer Protocol over SSL) This section explains how to enable authentication and encrypted communication over SSL (Secure Socket Layer). It helps protect streaming data transmission over the Internet on higher security level. Enable HTTPS Check this item to enable HTTPS communication, then select a connection option: "HTTP & HTTPS" or "HTTPS only".
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 4. The Certificate Information will automatically be displayed in the third column as shown below. You can click Property to see the detailed information of the certificate. 5. Click Home to return to the main page. Change the address from “http://” to “https://“ in the address bar and press Enter on your keyboard. If you see the following message, please click Continue to this website.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Create self-signed certificate manually 1. Select this option. 2. Click Create to open a Create Certificate page, then click Save to generate the certificate. 3. The Certificate Information will automatically be displayed in the third column as shown below. You can click Property to see the detailed information of the certificate. 4.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 3. If you see the following Information bar, click OK and click on the Information bar on the top of the page to allow pop-ups. 4. The Pop-up window shows an example of a certificate request.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 5. Look for a trusted certificate authority that issues digital certificates. Enroll the Network Camera. Wait for the certificate authority to issue a SSL certificate; click Browse... to search for the issued certificate, then click Upload in the second column. 6. Please refer to step 4.~ 5. on page 25. NOTE ► How to cancel HTTPS settings? 1.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Network This section explains how to configure wired network connection for the Network Camera. Network Type LAN Select this option when the Network Camera is deployed on a local area network (LAN) and is intended to be accessed by local computers. The default setting of Network Type is LAN. Remember to click Save when you complete the Network setting.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Network Camera (192.168.5.151) Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option to allow the Network Camera to open ports on the router automatically so that video streams can be sent out from a LAN. To utilize of this feature, make sure that your router supports UPnPTM and it is activated.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 1. Go to Start, click Control Panel, then click Add or Remove Programs. 2. In the Add or Remove Programs dialog box, click Add/Remove Windows Components. 3. In the Windows Components Wizard dialog box, select Networking Services then click Details.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 4. In the Networking Services dialog box, select Universal Plug and Play then click OK. 5. Click Next in the following window. 6. Click Finish. UPnP TM is enabled. ► How does UPnP TM work? UPnP TM networking technology provides automatic IP configuration and dynamic discovery of devices added to a network.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Enable IPv6 Select this option then click Save to enable IPv6 settings. Please note that this only works if your network environment and hardware equipment support IPv6. The browser should be Microsoft® Internet Explorer 6.5, Mozilla Firefox 3.0 or above. When IPv6 is enabled, by default, the network camera will listen to router advertisements and be assigned with a link-local IPv6 address accordingly.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Please follow the steps below to link to IPv6 address: 1. Open your web browser. 2. Enter the link-global or link-local IPv6 address to the address bar of your web browser. 3. The format should be: http://[2001:0c08:2500:0002:0202:d1ff:fe04:65f4]/ IPv6 address 4. Press Enter on the keyboard or click Refresh button to refresh the webpage.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions HTTP To utilize HTTP authentication, make sure that your have set a password for the Network Camera first; please refer to Security on page 23 for details. Authentication: Depending on your network security requirements, the Network Camera provides two types of security settings for an HTTP transaction: basic and digest.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions URL command -- http://:/ For example, when the Access name for stream 2 is set to video2.mjpg: 1. Launch Mozilla Firefox or Netscape. 2. Type the URL command in the address bar. Press Enter. 3. The JPEG images will be displayed in your web browser. http://192.168.5.151/video2.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way audio function, make sure the video mode is set to “MPEG-4” on the Audio and Video Settings page and the media option is set to “Video and Audio” on the Client Settings page. Please refer to Client Settings on page 19 and Audio and Video Settings on page 44.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions RTSP Streaming To utilize the RTSP streaming authentication, make sure that your have set a password for the Network Camera first; please refer to Security on page 23 for details. Authentication: Depending on your network security requirements, the Network Camera provides three types of security settings for streaming via RTSP protocol: disable, basic and digest.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions RTSP port /RTP port for video, audio/ RTCP port for video, audio The RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port number is set to 554. ■ The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Wireless LAN (IP7139 only) SSID (Service Set Identifier): This is the name that identifies a wireless network. Access Points and wireless clients attempting to connect to a specific WLAN (Wireless Local Area Network) must use the same SSID. The default setting is “default”. Note: The maximum length for an SSID is 32 single-byte characters and cannot consist of “, <, >, or blank spaces.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 2. WEP (Wired Equivalent Privacy): This allows communication only with other devices with identical WEP settings. ■ Authentication Mode: Choose one of the following modes. The default setting is “Open”. Open – Communicates the key across the network. Shared – Allows communication only with other devices with identical WEP settings. ■ Key length: The administrator can set the key length to 64 or 128 bits. The default setting is “64 bits”.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 3. WPA-PSK: Use WPA (Wi-Fi Protected Access) pre-shared key. More secure than WEP, the Wi-Fi Alliance developed WPA (Wi-Fi Protected Access) in 2003 to address WEP’s weaknesses. Improvements included TKIP, which changes the encryption key for each data transmission. ■ Algorithm: Choose one of the following algorithms for WPA-PSK and WPA2-PSK modes. TKIP (Temporal Key Integrity Protocol): A security protocol used in IEEE 802.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions DDNS This section explains how to configure the dynamic domain name service for the Network Camera. DDNS is a service that allows your Network Camera, especially when assigned with a dynamic IP address, to have a fixed host and domain name. DDNS: Dynamic Domain Name Service Enable DDNS: Select this option to enable the DDNS setting. Provider: Select a DDNS provider from the Provider drop-down list. VIVOTEK offers Safe100.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions [Register] Successfully Your account information has been mailed to registered e-mail address 4. Select Enable DDNS then click Save to enable the settings. ■ CustomSafe100 VIVOTEK offers documents to establish CustomSafe100 DDNS server for distributors and system integrators. You can use CustomSafe100 to register a dynamic domain name if your distributor or system integrators offer such services. 1.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Access List This section explains how to control access permission by verifying the client PC’s IP address. General Settings Maximum number of concurrent streaming connection(s) limited to: Simultaneous live viewing for 1~10 clients (including stream 1 and stream 2). The default value is 10.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions ■ Refresh: Click this button will refresh all current connections. ■ Add to deny list: You can select entries from the Connection Status list and add them to the Deny List to deny access. Please note that those checked connections will only be disconnected temporarily and will automatically try to re-link again (IE Explore or Quick Time Player).
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Network: This rule allows the user to assign a network address and corresponding subnet mask to the Allow/Deny List. For example: IP address 192.168.2.x will be bolcked. Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List. This rule is only applied to IPv4. For example: ■ Delete Allowed/Denied list: In the Delete Allowed List or Delete Denied List column, make a selection and click Delete.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Audio and Video This section explains how to cofigure the audio and video settings of the Network Camera. It is composed of the following two columns: Video Settings and Audio Settings. Video Settings Video title: Enter a name that will be displayed on the title bar of the live video. Video Title Color: Select to display color or black/white video streams.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Overlay title and time stamp on video: Select this option to place the video title and time on the video streams. Note that when the frame size is set to 176 x 144 as shown in the picture below, only the time will be stamped on the video streams. Video 18:17:25 2008/12/15 18:17:25 2008/12/15 Image Settings Click Image settings to open the Image Settings page.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions ■ Keep current value Follow the steps below to manually set the white balance to compensate for the ambient lighting conditions. 1. Set the White balance to Auto and click Save. 2. Place a sheet of white paper in front of the lens; then allow the Network Camera to adjust the color temperature automatically. 3. Select Keep current value to confirm the setting while the white balance is being measured. 4. Click Save to enable the settings.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Options of Video Choose either Video quality first or Video frame rate first for the video streams. Video quality settings for stream 1 / stream 2 The Network Camera offers two choices of video compression standards for real-time viewing, so you can choose MPEG-4 or MJPEG for dual streams. Click the items to display the detailed configuration settings. You can set up two seperate streams for the Network Camera for different viewing devices.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions ■ Intra frame period Determine how often to plant an I frame. The shorter the duration, the more likely you will get better video quality, but at the cost of higher network bandwidth consumption. Select the intra frame period from the following durations: 1/4 second, 1/2 second, 1 second, 2 seconds, 3 seconds, and 4 seconds.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Audio Settings The Network Camera offers two inputs to capture audio - internal microphone or external microphone. Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note that if mute mode is turned on, no audio data will be transmitted even if audio transmission is enabled on the Client Settings page.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Motion Detection This section explains how to configure the Network Camera to enable motion detection. A total of three motion detection windows can be configured. Video(TCP-AV) Follow the steps below to enable motion detection: 1. Click New to add a new motion detection window. 2. In the Window Name text box, enter a name for the motion detection window. ■ To move and resize the window, drag and drop your mouse on the window.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the defined threshold. Percentage = 30% NOTE ► How does motion detection work? A C B D There are two motion detection parameters: Sensitivity and Percentage. In the illustration above, frame A and frame B are two sequential images.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Homepage Layout This section explains how to set up your own customized homepage layout. Preview This column shows the settings of your hompage layout. You can manually select the background and font colors in Theme Options (the third column on this page). The settings will be displayed automatically in this Preview field.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Theme Options Here you can change the color of your homepage layout. There are three types of preset patterns for you to choose from. The new layout will simultaneously appear in the Preview filed. Click Save to enable the settings.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions ■ Follow the steps below to set up customized homepage: 1. Click Custom on the left column. 2. Click the field where you want to change the color on the right column. Color Picker Customed Pattern 3. The palette window will pop up as shown below. 2 3 1 4 4. Drag the slider bar and click on the left square to select a desired color. 5. The selected color will show up in the corresponding fields and in the Preview column. 6.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Application This section explains how to configure the Network Camera to responds to particular situations (event). A typical application is that when a motion is detected, the Network Camera sends buffered images to an FTP server or e-mail address as notifications. In the illustation on the right, an event can be triggered by many sources, such as motion detection or external digital input devices.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Event Settings In the Event Settings column, click Add to open the Event Settings page. On this page, you can arrange three elements -- Trigger, Schedule, and Action to plot an event. A total of 3 event settings can be configured. Event name: Enter a name for the event setting. Enable this event: Select this option to enable this event setting. Priority: Select the relative importance of this event (High, Normal, or Low).
VIVOTEK - A Leading Provider of Multimedia Communication Solutions An event is an action initiated by a user-defined trigger source; it is the causal arrangement of the following three elements: Trigger, Event Schedule, and Action. Trigger This is the cause or stimulus which defines when to trigger the Network Camera. The trigger source can be configured to use the Network Camera’s built-in motion detection mechanism or external digital input devices.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Event Schedule Specify the period for the event. ■ Select the days of the week. ■ Select the recording schedule in 24-hr time format. Action Define what actions to be performed by the Network Camera when a trigger is activated. seconds ■ Trigger digital output for Select this option to turn on the external digital output device when a trigger is activated. Specify the length of the trigger interval in the text box.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions To set an event with recorded video or snapshots, it is necessary to configure the server and media settings so that the Network Camera will know what action to take (such as which server to send the media files to) when a trigger is activated. ■ Add Server / Add Media Click Add Server to configure Server Settings. For more information, please refer to Server Settings on page 65. Click Add Media to configure Media Settings.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions When completed, click Save to enable the settings then click Close to exit Event Settings page. The new event settings / server settings / media settings will appear in the event drop-down list on the Application page. Here is an example of Application page with an event setting: When the Event Status is ON, once an event is triggered by motion detection, the Network Camera will automatically send snapshots via e-mail.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Server Settings Click Add Server on Event Settings page to open the Server Setting page. On this page, you can specify where the notification messages are sent when a trigger is activated. A total of 5 server settings can be configured. Server name: Enter a name for the server setting. Server Type There are four choices of server types available: Email, FTP, HTTP, and Network storage.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions FTP: Select to send the media files to a FTP server when a trigger is activated. ■ Server address: Enter the domain name or IP address of the FTP server. ■ Server port By default, the FTP server port is set to 21. It can also be assigned to another port number between 1025 and 65535. ■ User name: Enter the login name of the FTP account. ■ Password: Enter the password of the FTP account.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions HTTP: Select to send the media files to an HTTP server when a trigger is activated. ■ URL: Enter the URL of the HTTP server. ■ User name: Enter the user name if necessary. ■ Password: Enter the password if necessary. To verify if the HTTP settings are correctly configured, click Test. The result will be shown in a pop-up window as below. If successful, you will receive a test.txt file on the HTTP server.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Media Settings Click Add Media on the Event Settings page to open the Media Settings page. On this page, you can specify the type of media that will be sent when a trigger is activated. A total of 5 media settings can be configured. Media name: Enter a name for the media setting. Media Type There are three choices of media types available: Snapshot, Video Clip, and System log. Select the item to display the detailed configuration options.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Video clip: Select to send video clips when a trigger is activated. ■ Source: Select to record video clips from stream 1 or stream 2. ■ Pre-event recording The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Enter a number to decide the duration of recording before a trigger is activated. Up to 9 seconds can be set. ■ Maximum duration Specify the maximum recording duration in seconds.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Recording notify message: Select to send a recording notification message when a trigger is activated. The following is an example of a recording notification message (.txt file), which shows a list of deleted previously-recorded data due to cycle recording. When completed, click Save to enable the settings then click Close to exit this page. The new media settings will appear on the Event Settings page.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Click 20081120 to open the directory: The format is: HH (24r) Click to open the file list of that hour Click to go back to the previous level of the directory Click to delete some items Click to delete all recorded data The format is: File name prefix + Minute (mm) You can set up the file name prefix on Media Settings page. Please refer to page 68 for detailed information.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Recording This section explains how to configure the recording settings for the Network Camera. Recording Settings Insert your CF card and click here to test NOTE ► Before setting up this page, please set up the Network Storage on the Server Settings page first. ► Please remember to format your CF card when using for the first time. Please refer to page 80 for detailed information.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions If successful, you will receive a test.txt file on the network storage server. 3. Enter a server name 4. Click Save to complete the setting and click Close to exit the page. Recording Settings Click Add to open the recording setting page. In this page, you can define the recording source, recording schedule and recording capacity. A total of 2 recording settings can be configured.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Recording name: Enter a name for the recording setting. Enable this recording: Select this option to enable video recording. Priority: Select the relative importance of this recording setting (High, Normal, and Low). Source: Select the recording source (stream 1 or stream 2). Recording schedule: Specify the recording duration. ■ Select the days of the week. ■ Select the recording start and end times in 24-hr time format.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions System Log This section explains how to configure the Network Camera to send the system log to the remote server as backup. Remote Log You can configure the Network Camera to send the system log file to a remote server as a log backup. Before utilizing this feature, it is suggested that the user install a log-recording tool to receive system log messages from the Network Camera. An example is Kiwi Syslog Daemon. Visit http://www.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions View Parameters The View Parameters page lists the entire system’s parameters in alphabetical order. If you need technical assistance, please provide the information listed on this page.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Maintenance This chapter explains how to restore the Network Camera to factory default, upgrade firmware version, etc. Reboot This feature allows you to reboot the Network Camera, which takes about one minute to complete. When completed, the live video page will be displayed in your browser. The following message will be displayed during the reboot process.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Upload / Export Daylight Saving Time Configuration File This feature allows you to Export / Upload daylight saving time rules. Follow the steps below to export: 1. In the Export files column, click Export to export the daylight saving time configuration file from the Network Camera. 2. A file download dialog will pop up as shown below. Click Open to review the XML file or click Save to store the file for editing. 3.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Upload daylight saving time rule: Click Browse… and specify the XML file to upload. To enable the DST, please refer to System Time on page 22. If the incorrect date and time is assigned, you will see the following warning message when uploading the file to the Network Camera. The following message is displayed when attempting to upload an incorrect file format.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Follow the steps below to upgrade the firmware: 1. Download the latest firmware file from the VIVOTEK website. The file is in .pkg file format. 2. Click Browse… and specify the firmware file. 3. Click Upgrade. The Network Camera starts to upgrade and will reboot automatically when the upgrade completes. If the upgrade is successful, you will see “Reboot system now!! This connection will close”. After that, reaccess the Network Camera.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Appendix URL Commands of the Network Camera Overview For some customers who already have their own web site or web control application, Network Camera/ Video server can be easily integrated through convenient URLs. This section specifies the external HTTP based application programming interface. The HTTP based camera interface provides the functionality to request a single image, to control camera functions (PTZ, output relay etc.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Overview For some customers who already have their own web site or web control application, Network Camera/Video server can be easily integrated through convenient URLs. This document provides the supersets of URL commands V2 for 7000 series products. This section specifies the external HTTP based application programming interface.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions General CGI URL syntax and parameters CGI parameters are written in lower-case and as one word without any underscores or other separators. When the CGI request includes internal camera parameters, the internal parameters must be written exactly as they are named in the camera or video server. The CGIs are organized in function related directories under the cgi-bin directory. The file extension of the CGI is required.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions http:///cgi-bin/operator/getparam.cgi?[] [&…] http:///cgi-bin/admin/getparam.cgi?[] [&…] where the should be [_] or [.] If you do not specify the any parameters, all the parameters on the server will be returned. If you specify only , the parameters of related group will be returned.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Set server parameter values Note: The access right depends on the URL directory. Method: GET/POST Syntax: http:///cgi-bin/anonymous/setparam.cgi? = [&=…][&update=][&return=] http:///cgi-bin/viewer/setparam.cgi? = [&=…][&update=] [&return=] http:///cgi-bin/operator/setparam.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions =\r\n [] Only the parameters that you set and readable will be returned. Example: Set the IP address of server to 192.168.0.123 Request: http://myserver/cgi-bin/admin/setparam.cgi?network_ipaddress=192.168.0.123 Response: HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: 33\r\n \r\n network.ipaddress=192.168.0.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions NOTE: The camera should prevent to restart when parameter changed. Group: system NAME VALUE SECURITY DESCRIPTION (get/set) hostname string[40] 1/6 host name of server (Network Camera, Wireless Network Camera, Video Server, Wireless Video Server) ledoff 6/6 turn on(0) or turn off(1) all led indicators date time , 6/6 Current date of system. Set to ‘keep’ keep, keeping date unchanged.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions -160: GMT-04:00 Atlantic Time, Canada, Caracas, La Paz, Santiago -140: GMT-03:30 Newfoundland -120: GMT-03:00 Brasilia, Buenos Aires, Georgetown, Greenland -80: GMT-02:00 Mid-Atlantic -40: GMT-01:00 Azores, Cape_Verde_IS.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Taipei 360: GMT 09:00 Osaka, Sapporo, Tokyo, Seoul, Yakutsk 380: GMT 09:30 Adelaide, Darwin 400: GMT 10:00 Brisbane, Canberra, Melbourne, Sydney, Guam, Vladivostok 440: GMT 11:00 Magadan, Solomon Is., New Caledonia 480: GMT 12:00 Aucklan, Wellington, Fiji, Kamchatka, Marshall Is.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions default value except all daylight saving time settings. This command can cooperate with other “restoreexceptXYZ” commands. When cooperating with others, the system parameters will be restored to default value except a union of combined results. SubGroup of system: info (The fields in this group are unchangeable.) NAME VALUE SECURITY DESCRIPTION (get/set) modelname string[40] 0/7 Internal model name of server (eg.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Group: di_i<0~(ndi-1)> (capability.ndi > 0) NAME VALUE SECURITY DESCRIPTION (get/set) normalstate high, 1/1 indicate whether open circuit or closed low circuit represents inactive status Group: do_i<0~(ndo-1)> (capability.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions subnet 6/6 subnet mask router 6/6 default gateway dns1 6/6 primary DNS server dns2 6/6 secondary DNS server wins1 6/6 primary WINS server wins2 6/6 secondary WINS server Subgroup of network: ipv6 NAME VALUE SECURITY DESCRIPTION (get/set) enable 6/6 Enable IPv6 addonipaddress 6/6 IPv6 IP address addonprefixl
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Subgroup of network: https NAME VALUE SECURITY DESCRIPTION (get/set) port 443, 1025 ~ 6/6 HTTPS port 65535 Subgroup of network: rtsp NAME VALUE SECURITY DESCRIPTION (get/set) port 554, 1025 ~ 1/6 65535 RTSP port (capability.protocol.rtsp=1) anonymousviewing 1/6 Enable anoymous streaming viewing. authmode disable, 1/6 RTSP authentication mode basic, (capability.protocol.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Subgroup of network: sip NAME VALUE SECURITY DESCRIPTION (get/set) port 554, 1025 ~ 6/6 65535 SIP port (capability.protocol.sip=1) Subgroup of network: rtp NAME VALUE SECURITY DESCRIPTION (get/set) videoport 1025 ~ 65535 6/6 video channel port for RTP (capability.protocol.rtp_unicast=1) audioport 1025 ~ 65535 6/6 audio channel port for RTP (capability.protocol.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 1 => WEP, 2 => WPA, 3 => WPA2PSK authmode OPEN, SHARED 6/6 Authentication mode keylength 64, 128 6/6 key length in bits keyformat HEX, ASCII 6/6 key1 ~ key4 presentation format keyselect 1~4 6/6 default key number key1 password [32] 6/6 WEP key1 for encryption. The valid characters are [A-Z] [a-z] [0-9]. key2 password [32] 6/6 WEP key2 for encryption. The valid characters are [A-Z] [a-z] [0-9].
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 255.255.255.255 deny_i<0~9>_end 1.0.0.0 ~ 6/6 Denied ending IPv4 address for connection 255.255.255.255 ipv6_allow_i<0~9> String[44] 6/6 Allowed IPv6 address for connection ipv6_deny_i<0~9> String[44] 6/6 Denied IPv6 address for connection Group: videoin NAME VALUE SECURITY DESCRIPTION (get/set) cmosfreq 50, 60 4/4 CMOS frequency (videoin.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions text string[16] 1/4 enclosed caption imprinttimestamp 4/4 Overlay time stamp on video maxexposure 1~120 4/4 Maximum exposure time options quality, 4/4 To customize video quality first or video framerate frame rate first.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions CIF, 352x240, 352x288, 4CIF, 704x480, 704x576 s<0~(m-1)>_mpeg4_intraper 250, 500, 1000, iod 2000, 3000, 4/4 The period of intra frame in milliseconds 4/4 cbr, constant bitrate 4000 s<0~(m-1)>_mpeg4_ratecon cbr, vbr trolmode s<0~(m-1)>_mpeg4_quant vbr, fix quality 0, 1~5 4/4 quality of video when choosing vbr in “ratecontrolmode”. 0 is customized manual input setting. 1 is worst quality and 5 is the best quality.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Group: audioin_c<0~(n-1)> for n channel products (capability.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions according to mode settings. contrast -5 ~ 5 4/4 Preview of adjusting contrast of image according to mode settings. sharpness 4/4 Preview of adjusting sharpness of image according to mode settings.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions meemail _passwo string[64] 6/6 Your password or key to login ddns service rdkey _servern provider string[128] 6/6 The server name for safe100. ame (This field only exists for provider is customsafe100) Group: upnppresentation NAME VALUE SECURITY DESCRIPTION (get/set) enable 6/6 Enable or disable the UPNP presentation service.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Group: privacymask_c<0~(n-1)> for n channel product NAME VALUE SECURITY DESCRIPTION (get/set) enable 4/4 Enable the privacy mask win_i<0~4>_enable 4/4 Enable the privacy mask window win_i<0~4>_name string[14] 4/4 The name of privacy mask window win_i<0~4>_left 0 ~ 320/352 4/4 Left coordinate of window position. win_i<0~4>_top 0 ~ 240/288 4/4 Top coordinate of window position.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions 0(not support), 1(support) Bit 1 => Build-in or external camera. 0(external), 1(build-in) Bit 2 => Support pan operation. 0(not support), 1(support) Bit 3 => Support tilt operation. 0(not support), 1(support) Bit 4 => Support zoom operation. 0(not support), 1(support) Bit 5 => Support focus operation. 0(not support), 1(support) Bit 6 => Support iris operation. 0(not support), 1(support) Bit 7 => External or build-in PT.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions backchannel protocol_rtp_tcp <ٛ oolean> 0/7 indicate whether to support rtp over tcp protocol_rtp_http <ٛ oolean> 0/7 indicate whether to support rtp over http protocol_spush_mjpe <ٛ oolean> 0/7 indicate whether to support server push g motion jpeg protocol_snmp <ٛ oolean> 0/7 indicate whether to support snmp Protocol_ipv6 0/7 indicate whether to support ipv6 videoin_type 0, 1, 2 0/7 0 => Interlaced CCD 1 =
VIVOTEK - A Leading Provider of Multimedia Communication Solutions uart_httptunnel 0/7 Indicate whether to support the http tunnel for uart transfer transmission_mode Tx, 0/7 Indicate what kind of transmission mode Rx, the machine used. TX: server, Rx: Both receiver box, Both: DVR?.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions priority 0, 1, 2 6/6 Indicate the priority of this event. “0” indicates low priority. “1” indicates normal priority. “2” indicates high priority. delay 1~999 6/6 Delay seconds before detect next event. trigger boot, 6/6 Indicate the trigger condition. di, “boot” indicates system boot. motion, “di” indicates digital input. seq, “motion” indicates video motion detection. recnotify “seq” indicates periodic condition.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions action_do_i<0~(ndo-1) 1~999 6/6 >_duration The duration of digital output is triggered in seconds. action_cf_enable 6/6 To enable put media on CF. action_cf_folder string[128] 6/6 The path to store media. action_cf_media NULL, 0~4 6/6 The index of attached media. action_cf_datefolder 6/6 Enable this to create folders by date time and hour automatically.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions email_port 0~65535 6/6 The port to connect the server. email_username string[64] 6/6 The username to login in the server. email_passwd string[64] 6/6 The password of the user. email_senderemail string[128] 6/6 The email address of sender. email_recipientemail string[128] 6/6 The email address of recipient. ns_location string[128] 6/6 The location to upload or store the media.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Group: recording_i<0~1> PARAMETER VALUE SECURITY DESCRIPTION (get/set) name string[40] 6/6 The identification of this entry enable 0, 1 6/6 To enable or disable this recoding. priority 0, 1, 2 6/6 Indicate the priority of this recoding. “0” indicates low priority. “1” indicates normal priority. “2” indicates high priority. source 6/6 Indicate the source of media stream. 0 means the first stream.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions weekday 6/6 Indicate which weekday is scheduled. One bit represents one weekday. The bit0 (LSB) indicates Saturday. The bit1 indicates Friday. The bit2 indicates Thursday. The bit3 indicates Wednesday. The bit4 indicates Tuesday. The bit5 indicates Monday. The bit6 indicates Sunday. For example, to detect events on Friday and Sunday, set weekday as 66. begintime hh:mm 6/6 Begin time of weekly schedule.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions redirect to https connection method auto, status 6/6 auto => Create self-signed certificate automatically manual, manual => Create self-signed certificate manually install install => Create certificate request and install -2 ~ 1 6/6 Specify the https status.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Example: Drive the digital output 1 to triggered state and redirect to an empty page http://myserver/cgi-bin/dido/setdo.cgi?do1=1 Query status of the digital input Note: This request requires the privilege of viewer. Method: GET/POST Syntax: http:///cgi-bin/dido/getdi.cgi?[di0][&di1][&di2][&di3] If no parameter is specified, all the status of digital input will be returned. Return: HTTP/1.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Query status of the digital output Note: This request requires the privilege of viewer. Method: GET/POST Syntax: http:///cgi-bin/dido/getdo.cgi?[do0][&do1][&do2][&do3] If no parameter is specified, all the status of digital output will be returned. Return: HTTP/1.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions http:///cgi-bin/viewer/video.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions username The name of user to add, delete or edit userpass The password of new user to add or that of old user to modify. The default value is an empty string. privilege return The privilege of user to add or to modify. viewer viewer’s privilege operator operator’s privilege admin administrator’s privilege Redirect to the page after the parameter is assigned.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Server will return the up-to-date configuration file. PARAMETER VALUE DEFAULT DESCRIPTION format xml xml the format for config file. Return: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: \r\n \r\n \r\n Upgrade firmware Note: This request requires administrator privilege Method: POST Syntax: http:///cgi-bin/admin/upgrade.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions in the previous version (0100) is obsolete. Please use “getparam.cgi?capability” instead. Return: HTTP/1.0 200 OK\r\n Content-Type: text/plain\r\n Content-Length: \r\n \r\n Model=\r\n CapVersion=0200\r\n PARAMETER(supported VALUE DESCRIPTION system.firmwareversion Model name of server.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions deleteallow Remove a set of allow IP address range from server. If start and end parameters are specified, it will try to remove the matched IP address. If index is specified, it will try to remove the address from given index position. [start, end] parameters have higher priority then the [index] parameter. deletedeny Remove a set of deny IP address range from server.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions content-length: 32767 expires: Sun, 9 Jam 1972 00:00:00 GMT User must use GET and POST to establish two channels for downstream and upstream. The x-sessioncookie in the GET and POST should be the same to be recognized as a pair for one session. The contents of upstream should be base64 encoded to be able to pass through some proxy server. This channel will help to do real-time event notification and control.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Senddata (capability.nuart>0) Note: This request requires privilege of viewer Method: GET/POST Syntax: http:///cgi-bin/viewer/senddata.cgi? [com=][&data=][&flush=] [&wait=] [&read=] PARAMETER VALUE DESCRIPTION com 1 ~ data is s series of digit within 0 ~ 9, A ~ F.
MIC In Button Wireless Antenna Connector Router Power Cord VIVOTEK - A Leading Provider of Multimedia Communication Solutions Socket IP7138 Audio Out Ethernet 10/100 RJ45 Socket General I/O Terminal Block Technical Specifications PC with Recording Software Specifications Models Alarm and Event Management ．IP7138 (PoE) ．IP7139 (WLAN) ．Triple-window video motion detection ．One D/I and one D/O for external sensor and alarm ．Event notification using HTTP, SMTP, or FTP ．Local recording of MP4 file Sy
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Technology License Notice MPEG-4 AAC Technology THIS PRODUCT IS LICENSED UNDER THE MPEG-4 AAC AUDIO PATENT LICENSE. THIS PRODUCT MAY NOT BE DECOMPILED, REVERSE-ENGINEERED OR COPIED, EXCEPT REGARD TO PC SOFTWARE, YOU MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOSES. FOR MORE INFORMATION, PLEASE REFER TO HTTP://WWW.VIALICENSING.COM.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions Electromagnetic Compatibility (EMC) FCC Statement This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions. ■ This device may not cause harmful interference, and ■ This device must accept any interference received, including interference that may cause undesired operation.
