Operation Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

User's Manual - 29

Network

This section explains how to congure wired network connection for the Network Camera.

Network Type

LAN

Select this option when the Network Camera is deployed on a local area network (LAN) and is intended

to be accessed by local computers� The default setting of Network Type is LAN� Remember to click Save

when you complete the Network setting�

Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by

the DHCP server each time the camera is connected to the LAN�

Use xed IP address: Select this option to manually assign a static IP address to the Network Camera�

1. You can make use of VIVOTEK installation wizard 2 on the software CD to easily set up the Network

Camera on the LAN� Please refer to Software installation on page 10 for details�

2� Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP�

Enable UPnP presentation: Select this option to enable UPnP

presentation for your Network Camera

so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras

will be listed in My Network Places� You can click the shortcut to link to the web browser� Currently,

UPnP

is supported by Windows XP or later. Note that to utilize this feature, please make sure the

UPnP

component is installed on your computer�