User Manual

ManualsBrands5 SUNDAY LIVING ManualsCooling & Air QualitySunday Living Electric Space Heater, Portable Infrared Heater, 1500W Fast Heating, High/Auto Heating Mode, Remote Control, Quiet Fan, Overheat Protection, Black, GD9315BC1-A1J

Table Of Contents

INSTRUCTION MANUAL

ELECTRICAL INFRARED HEATER

Model No. GD9315BC1-A1J

Thank you for purchasing your new heater.

These operating instructions will help you use it properly and safely.

We recommend that you spend some time reading this instruction manual in order that you fully

understand all the operational features it offers.

Read all the safety instructions carefully before use and keep this instruction manual for future

reference

Facebook: #SundayLiving

Message: #SundayLiving

Email: service@sundaylivinginc.com

Summary of content (8 pages)

PAGE 1
INSTRUCTION MANUAL ELECTRICAL INFRARED HEATER Model No. GD9315BC1-A1J Thank you for purchasing your new heater. These operating instructions will help you use it properly and safely. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers.
PAGE 2
SAFETY WARNINGS READ ALL INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE THIS UNIT. KEEP THE ASSEMBLY INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THE ASSEMBLY INSTRUCTIONS FOR FUTURE REFERENCE. KEEP THE ORIGINAL PACKAGING FOR USE WHEN STORING THE HEATER DURING EXTENDED PERIODS OF NON-USE. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Read ALL instructions before using this unit. CAUTION: Risk of Electric Shock. DO NOT open or try to repair the heater yourself.
PAGE 3
22. Connect to properly grounded outlets only. 23. .Save these instructions. SPECIFICATION Voltage Rating 120 V (60Hz) Power Consumption 1500W Unit Size 14.5 in. (W) x 11.4 in. (D) x 15 in. (H) Unit Weight 13.1lbs SAFETY FEATURES Tip-Over Safety Feature This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored an upright position, the heater will reset.
PAGE 4
PRODUCT DIAGRAM Wooden Cabinet Remote Control Air Intake Air Outlet Cord Clamp Front Panel Power Switch Control Panel Wheel Control Panel 1 2 1. 2. 3. 4. 5. 6. 7. 10 9 8 7 6 5 4 3 Indicating light of highest temp: Light’s on when set at the maximum temp. Indicating light of lowest temp: Light’s on when set at the minimum temp. Temp down button: For setting temp downward. Signal-receiving window: For receiving remote control signal. Temp up button: For setting temp upward.
PAGE 5
8. Indicating light of auto heat-up mode: Light’s on when you select auto heat-up mode. 9. Power switch button: For power-on or off. 10. Power indicator light：Indicates that the heater is receiving power from outlet.
PAGE 6
OPERATING INSTRUCTION 1、Start and select working mode Turn the heater on by pressing the Power button on the control panel or by pressing the Power button on the supplied remote control. Once power is off heating element will stop working at first. Fan will prolong working for 3 min to emit plenty of heat inside. This mark will indicate running during the 3 min. Or Select a heat setting. Press the Mode button to alternate between the two heat settings.
PAGE 7
Press Temp Up and Temp Down buttons once for 3 seconds. Locking is fulfilled when a buzzer rings. When locked, control panel and remote control failed to function. And When release is needed, please re-press Temp Up and Temp Down buttons once for 3 seconds. Release is fulfilled when a buzzer rings. Lock indication disappears. Control panel and remote control return to function. And MAINTENANCE 1. Turn off the power switch in the rear of the unit. 2. Unplug the unit and let it cool completely. 3.
PAGE 8
Battery cover Battery PULL PUSH STORAGE Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit. TROUBLESHOOTING If the heater will not operate, please check the following before seeking repair of service:  Check if the power cord is plugged into an electrical outlet, if not, plug in.  Check if electricity to the main fuse is working.