User's Manual

Installation

1. Installing the electrostatic sticker.

Clean your windshield and put the electrostatic sticker on the

recommended area as shown in the figure. Make sure you remove

air bubbles between the sticker and the glass.

2. Installing the memory card.

Insert the memory card into the card slot with its contacts facing

up until you hear a click. The memory card is well-installed.

3. Installing the mount.

Attach the mount to the slot and slide up, as shown in the figure.

You will hear a snap when it is in place. Make sure the mount is

securely installed to the dash cam.

Note: Make sure to stick the electrostatic sticker on a flat and smooth part of the windshield, press it firmly,

and avoid sticking it on the edge of the windshield's film to prevent it from falling down.

'&,1

0LFUR6'