Streaming and Video Mini Wireless Microphone (For USB-C & USB-A Interface) User manual
Foreword Thanks for purchasing 7RYMS RimoMic Lite UC Mini Wireless Microphone (For USB-C & USB-A Interface ) To ensure bring you a good using experience, please read this manual book carefully before using and correctly install and operate. Main Features . Mini Wireless Microphone, Delicate and Portable . Wireless Working Range up to 30m . Support Real-time Monitor for Both PC&MIC . Intuitive Visual Power and Volume Monitor . Adjustable Volume, Low Cut Filter .
Packing List Main Parts: Transmitter(TX) Receiver (RX) Accessories: 1. USB C-USB A Adapter 2. Wind Muff 3. Charging Cable 4. Carry Case 5. User Manual 6. Warranty Card Errun Electronic Technology www.7ryms-audio.
Components Introduction Transmitter(TX): 1. Internal Mic 2. Power/Low Cut Filter Indicator Light 3. Audio Status Indicator Light 4. Volume+ 5. Volume 6. Power/Low Cut Filter Button 7. Belt Clip 8. IR Sensor 9.
Receiver (RX): 1. IPS Display Screen 2. USB-C Plug 3. IR Sensor 4. Pairing Button 5. 3.
Installation and Operation Transmitter(TX): Install the transmitter on the collar through the belt clip so that the internal microphone points in the direction of the sound source Belt Clip Internal Mic For better hiding during use, it is recommended that the belt clip be fixed and used outwards 5
Receiver (RX): 1. Work with Smartphone: Install the receiver to the mobile phone with USB-C interface through the USB-C plug.
2. Work with Computer: 2.1 For computer with USB-C port, insert the receiver into the computer USB-C port; 2.
3.
Function and Usage Transmitter (TX): 1. Internal Mic Point the internal Mic at the sound source to record 2. Power/Low Cut Filter Indicator Light Blue light keeps on after turn on the Transmitter; Purple light keeps on after turn on Low Cut Filter mode; Red light flicker when pairing or low power; Red light keeps on when charging 3. Audio Status Indicator Light Blue light flicker when sound is input; Red light keeps on when sound is crackled 4.
6. USB-C Charging Port Connect the transmitter and 5V power supply through the USB A-USB C charging cable for charging 7.
Receiver (RX): 1. IR Sensor It's paired successfully only when the receiver and transmitter's IR sensor are closely aligned 2. Pairing Button Long press to pair 3. 3.5mm TRS/TRRS Headphone Monitor Port Insert 3.
Screen Display Instruction: Signal Strength Transmitter Battery Status Volume VOL Current Channel 12 56 Audio Dynamic Bar
VOL VOL 56 32 In the Pairing After pairing, the new channel will be displayed 13
This device operates on a no-interference, no-protection basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canada's Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Wireless Microphones in the TV Bands.
www.7ryms.com Email: support@7ryms.com The 7RYMS LOGO is trademark which is registered and owned by Errun Electronic Technology Co.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
ISED Statement ‐ English: This device complies with Industry Canada license ‐ exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B). ‐ French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
