User's Manual

5 Upgrading Sapphire 37
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Deployment Guide Release 3.1
802.11a/b/g unit:
[root@Eye]# ./7signal-eye-v0X.YY-APU2–installer.bin
802.11a/b/g/n unit:
[root@Eye]# ./7signal-eye-v0X.YY-APU3–installer.bin
Step 5: Reboot the Eye:
[root@Eye]# reboot
5.3 Stop Sapphire solution (Linux)
NOTE: All Sapphire components running on the Carat server must be stopped
before upgrade.
Step 1: Stop the Carat server:
Stop the Carat server by issuing the command:
# 7carat stop
Command output should be the following:
7signal Sapphire Carat is running
Shutting down 7signal Sapphire Carat: OK
7signal Sapphire Carat is not running
Step 2: Stop the Loupe server:
Stop the Loupe server by issuing the command:
# 7loupe stop
Command output should be the following:
Shutting down 7signal Loupe server: JRE_HOME is now set to =
/opt/7signal/jre
in /opt/7signal/Loupe/shutdown_loupe_server.sh
Attempting to shutdown the Apache Tomcat server... finished.
Killing possible Loupe processes.. no processes to kill
7signal Loupe server shutdown complete