User's Manual

5 Upgrading Sapphire 47
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Deployment Guide Release 3.1
5.10 Start Sapphire solution (Linux)
After all components have been upgraded, start the Carat and Loupe servers.
Step 1: Start the Carat server:
Start the Carat server by issuing the command:
# 7carat start
The Carat server starts in couple of seconds:
7signal Sapphire Carat is not running
Starting 7signal Sapphire Carat: OK
7signal Sapphire Carat is not running
7signal Sapphire Carat is not running
7signal Sapphire Carat is running
Step 2: Start the Loupe server:
Start the Loupe server by issuing the command:
# 7loupe start
The Loupe server starts in couple of seconds:
Starting 7signal Loupe server: 7signal Loupe server start complete
7signal Loupe server is not running
7signal Loupe server is running
5.11 Start Automated Testing
Automated testing is in stopped state after the Sapphire has been upgraded.
Step 1: Start Carat GUI:
Step 2: Start Automated Testing:
Select “Tools | Start Automated Testing”.