User's Manual

15 Alarms 40
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Carat Carat User Guide Release 3.1
15 ALARMS
Related icons
alarm configuration alarm configuration group
critical alarm network error
informational message warning message
The system alarms are initiated by significant changes in the monitored network's status or
topology. It is possible to send the alarms to an SNMP system. Please see the instructions later
in this document.
Alarms are used through alarm groups to which the desired alarms can be assigned. There is a
preconfigured alarm group, Global Alarms, which is active by default. The alarms will then be
issued by any access point in the network. The Global Alarms group includes the following
alarms:
• Managed Access Point Down
• Offending Channel Changes of Managed Domain
• Offending Channel Changes of External Domain
15.1 Creating Alarm Groups
You can extend the Global Alarms group or create new alarm groups. It is recommended that
you create new groups. To create a group, proceed as follows:
1. From the top menu bar, select “Manage | Alarm configuration”
2. Select “Alarm Groups” and right-click it
3. Select “Add Alarm Group”
4. Enter a name for the alarm group
5. Select the alarms by dragging them from “Alarm Templates” to the alarm group pane
6. When you have added all the alarms you want, select “Save”
Modification of alarms in a group
The table below lists the alarms. Some of them have parameters that can be modified. To
modify the parameters of an alarm, proceed as follows:
1. Select the alarm to be modified in the alarm group
2. Right-click and select “Edit”
3. Modify the parameter value
4. Select “Update”
Menu
Description
Modifiable?
Managed Access Point Not
Responding
The alarm is activated when a managed
access point does not respond. This is a
critical alarm.
No
Channel Interference
The alarm is activated when a new access
point with a strong signal is detected on a
managed channel. This is a warning alarm.
Yes
Managed Access Point Security
Settings Changed
The alarm is activated when the security
settings of a managed access point are
changed. This is a critical alarm.
No