User's Manual

15 Alarms 41
7signal Ltd, Panuntie 6, FI-00620 HELSINKI, FINLAND, [phone], [e-mail], www.7signal.com
7signal Sapphire Carat Carat User Guide Release 3.1
15.2 Binding Alarm Groups To Access Points
Alarms can be configured on a per-access-point basis by binding an alarm group to an access
point. Only an existing group can be bound to an access point.
1. In the Network topology, right-click the access point to which you want to bind the
alarms
Managed Access Point
Channel Violation
The alarm is activated when a managed
access point starts to use a restricted
channel. This is a warning alarm.
No
Non-Managed Access Point
Channel Violation
The alarm is activated when an external
access point starts to use a restricted
channel. This is a warning alarm.
No
Unknown Access Point
Detected
The alarm is activated when an unknown
access point is detected. This is a warning
alarm.
Yes
End to end latency time
exceeded.
The alarm is activated when the average
round-trip time in a ping test exceeds the
set limit. This is a warning alarm.
Yes
End-to-End Connection Loss
The alarm is activated when ping tests fail.
This is a critical alarm.
Yes
Retransmission Rate Exceeded
The alarm is activated when the
retransmission rate exceeds the set limit.
This is a critical alarm.
Yes
DCHP Server Unreachable
The alarm is activated on DHCP timeout.
This is a critical alarm.
Yes
Access Point MAC Change.
Alarm is activate when BSSID’s mac
changes.
No
Attach Success Rate
Alarm is activated when Attach Success
Rate falls under configured value.
Yes
DHCP Server Success Rate
Alarm is activated when DHCP success Rate
falls under configured value.
Yes
Beacon Availability
Alarm is activated when beacons are not
detected under configured value.
yes
FTP Download Throughput
Alarm is activated when throughput is
lower than configured value.
Yes
FTP Upload Throughput
Alarm is activated when throughput is
lower than configured value.
Yes
VoIP MOS, listen quality
Alarm is activated when listening quality
drops under configured value.
Yes
VoIP MOS, Talk quality
Alarm is activated when Talk quality drops
under configured value.
Yes
Ping Success Rate
Alarm is activated when Ping success rate
drops under configured value.
Yes
FTP Success Rate
Alarm is activated when FTP success rate
drops under configured value.
Yes
VoIP Success Rate
Alarm is activated when VoIP test success
rate drops under configured value.
Yes
Internet Availability
Alarm is activated when Internet
availability is lost.
No