Setup Guide Part 1
6 7signal solution 10
7signal Solutions, Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, info@7signal.com, www.7signal.com
7signal Sapphire Carat User Guide Release 5.0
points and Eyes can be
placed.
Eye
A Sapphire Eye or Micro Eye
monitoring station always
belongs to a service area. In
this menu, you can perform
Eye level tests, bind and
unbind test profile to/from
the Eye, report change events
for this Eye and modify Eye
connectivity properties
(change IP configuration, SSH
password etc.)
Edit
Remove
(De)Activate
Network key bindings
Change events
Network scan
Client scan
Spectrum analysis
Noise Monitor
Packet capture
Air Utilization test
Manual tests
Bind to test profile
Unbind from test profile
Automated test status
Bind SLA
Connection management
Wireless
network
This menu describes the
target network, which can be
located in one or more
service areas. A service area
can contain several target
networks. This menu is used
to configure the encryption
method used in the network,
configure allowed channels of
the network, and report
change events for the
network.
Add key
Edit
Unbind wireless network
Allowed channels
Bind SLA
Change events
Change events on this Service
Area
Access Point
In this menu, you can
perform tests, set alarm
groups for an access point,
report change events for the
access point, and deactivate
and activate the access point
(meaning that the access
point is monitored or not).
Properties
Manual tests
Bind to Alarm group
Unbind from Alarm group
Bind SLA
Remove access point
Allowed Channels
Change Relation to Eye
Change events
Change events on this Eye
(De)Activate
Link
In this menu, you can bind an
SLA group for the link.
Edit
Remove link
Bind SLA
Change events
Link group
In this menu, you can bind an
SLA group for the link group.
Edit
Bind SLA
Remove