Setup Guide Part 1

15 7signal solution 57
7signal Solutions, Inc., 526 S. Main Street, Akron, Ohio 44311, USA, 855-763-9526, info@7signal.com, www.7signal.com
7signal Sapphire Carat User Guide Release 5.0
Table 5: Alarms
Menu
Severity
Description
Modifiable
Managed Access Point Not
Responding
Critical
The alarm is activated when a
managed access point does not
respond.
No
Channel Interference
Warning
The alarm is activated when a
new access point with a strong
signal is detected on a managed
channel.
Yes
Managed Access Point Security
Settings Changed
Critical
The alarm is activated when the
security settings of a managed
access point are changed.
No
Managed Access Point Channel
Violation
Warning
The alarm is activated when a
managed access point starts to
use a restricted channel.
No
Non-Managed Access Point
Channel Violation
Warning
The alarm is activated when an
external access point starts to
use a restricted channel.
No
Unknown Access Point Detected
Warning
The alarm is activated when an
unknown access point is
detected.
Yes
End to end latency time exceeded.
Warning
The alarm is activated when the
average round-trip time in a
ping test exceeds the set limit.
Yes
End-to-End Connection Loss
Critical
The alarm is activated when
ping tests fail.
Yes
Retransmission Rate Exceeded
Critical
The alarm is activated when the
retransmission rate exceeds the
set limit.
Yes
DCHP Server Unreachable
Critical
The alarm is activated on DHCP
timeout.
Yes
Access Point MAC Change.
Warning
Alarm is activate when BSSID’s
MAC changes.
No
Attach Success Rate
Warning
Alarm is activated when Attach
Success Rate falls under
configured value.
Yes
DHCP Server Success Rate
Warning
Alarm is activated when DHCP
success Rate falls under
configured value.
Yes
Beacon Availability
Critical
Alarm is activated when
beacons are not detected under
configured value.
yes
TCP Download Throughput
Warning
Alarm is activated when
throughput is lower than
configured value.
Yes
TCP Upload Throughput
Warning
Alarm is activated when
throughput is lower than
configured value.
Yes