- 888 Digital, Inc. DVR User Manual

16
Installation
Auto Scan
1. Go to Main menu > Installation.
2. Press BLUE key to auto scan all the
channels.
3. Press EXIT key if you want to stop
during the auto scan.
Manual Scan
1. Go to Main menu > Installation
2. Press ▲▼ to select the channels you
want to scan. Press ◀▶ key to page
up/down .
3. Press OK key to select the channel, press
again to cancel your selection. If the channel
is selected, an icon “√” will appear.
4. Repeat step2, 3 to select other channels.
5. Press RED key to start scanning the
selected channels.
6. Press EXIT key if you want to stop during the scan.