User's Instructions

Bone conduction earphone
Instructions for user
1. Charge
Charge the headphones with the included micro-USB cable. The LED light will turn from red to blue when charging is
complete.
2. Pair
Start with your headphones off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing”and the LED
light flashes red and blue.
3. Connect
Open your device’s Bluetooth® menu and select. Audrey says ”Connected” and the LED light will flash blue one time.
Multifunction Button
Function
Action
Prompt/“Audrey Says™”
Play/pause music
Click once
One beep
Skip to next song
Double-click
while music is playing
One beep
Answer/end call
Click once
Two/One beep
Reject a call
Press and hold for 2 seconds
Two beeps
Volume Up/Power Button（+）; Volume Down Button（-）
Function
Action
Prompt/“Audrey Says™”
Power on
Press and hold volume+ for 3 seconds
“power on
Power off
Press and hold volume+ for 3 seconds
“Power off”
Adjust volume
Click the volume up or down button
to adjust volume
One beep
LED Indicator
Charging
Solid red
Charging complete
Solid blue
Pairing mode
Flashes red and blue
Specifications：
Brand EKEN
Part number E1
Bluetooth® version Bluetooth®v5.0