User Manual

!
 of 10 12
Additional info:
To ease directional positioning, an optional rotating plate
can be placed between the C-pan and the tripod.
At the top of the right rear shaft, there is a 1/4-20”
attachment point to mount accessories such as external
monitors.
The camera screw features a 1/4”-20 thread one one end
and 3/8”-16 thread on the opposite end.
To replace or switch the camera screw around, remove
plastic plug from slot end and slide camera screw to the
large opening.
Attachment points for optional motor or drag control on
underside of gear box.
Always insure that the counter weight clamps are tight up
against the counter weights so that they can’t slide on
the tube. If they slide on the tube in vertical or in sloped
position, then they could interrupt a smooth movement.