User Manual

!
 of 7 12
Set curved movements:
When moving the C-pan arm in a straight or curved movement, do not
extend the arm all the way to where the two arms touch the hinges.
When operating the C-pan arm, do not jolt the arms back and forth or make it abruptly stop or start.
This could be damaging the gears and lead to increased backlash in the whole mechanism.
Subject
1. Align the camera lens and the
C-pan arms with the subject.
Subject
2. Move arm out to one side.
Subject
3. Loosen the adjustment handle
and slide it to the right. Slide it
until the camera lens lines up with
the subject again. Tighten
adjustment handle.
To maintain the most accurate curve, do not move
the arms all the way to the maximum position.
The curvature of the movement becomes parabolic
the further it gets to the maximum position.