Specifications

ManualsBrands9315-1520 Quebec ManualsElectronicsIndieVice remote Pro

9315-1520 Quebec Inc. IndieVice remote Pro

TEL：514-900-0318 Fax：514-900-0318 ver1.0 Page 1

IndieVice remote Pro



Overview:

1. Bluetooth 3.0, without having to install software, streamlined peripherals,

QFN32packagedmakeiteasytoproduce.

2.Supportedmodel

Applefullseries,iPhone/iPad/iPod（iOS5.0oraboveversion）

Android mainstream smartphone(Samsung galaxys & note series, Meizu MX

series, Xiaomi 1s or above type, or some High‐end models, like

Huawei/Lenovo/HTCbrandsetc.)

(Some Andriod phones will not be supported due to each mobile phone

manufacturerwilladjustmentstotheinfrastructureofthesoftware.)

Hardwarespecification:

AB1126A+24C32



Staircaseoperatingcurrent（3Vtest）:



Connection 〈 15 mA

Match Code 〈 5mA

Button to Selfie 〈 1.5 mA

Button to release 〈 0.6mA

No button after 10 minutes

(deep sleep)

〈 3.0 uA

Power off(soft restart) 〈 3.0 uA



Summary of content (5 pages)

PAGE 1
9315-1520 Quebec Inc. IndieVice remote Pro IndieVice remote Pro Overview: 1. Bluetooth 3.0, without having to install software, streamlined peripherals, QFN32 packaged make it easy to produce. 2. Supported model Apple full series, iPhone/iPad/iPod（iOS5.0 or above version） Android mainstream smartphone(Samsung galaxys & note series, Meizu MX series, Xiaomi 1s or above type, or some High‐end models, like Huawei/Lenovo/HTC brands etc.
PAGE 2
9315-1520 Quebec Inc. IndieVice remote Pro Product List: *Selfie Button adopt the vol+ to operate. *Code sending method: iOS = Vol+，Android = Enter *Double system code = cannot shoot continuously（send code when lifting button）， Single system code = can shoot continuously On‐off operation： 1. When power on, the device will go into 5 seconds to connection automatically. If fails to connection, please match the code for 60 seconds. If still cannot match the code, the device will go into deep sleep state. 2.
PAGE 3
9315-1520 Quebec Inc. IndieVice remote Pro press the button to K03 3 1 Photography and Video switching power-on to send the code of the connect corresponding system press the button to K04 4 1 Focal length amplification power-on to send the code of the corresponding connect system press the button to K05 5 1 Focal length to narrow power-on to send the code of the connect corresponding system Notes： 1. Hard‐switching – 4 codes（K04 & K05 as one code，K01, K02 and K03 as one code） 2.
PAGE 4
9315-1520 Quebec Inc. IndieVice remote Pro 3. LED instruction mode： Starting up ‐ LED light on for 1 seconds，connect/match code – LED flash slowly， ELV reminded ‐ every 2 seconds flashing twice Sefie – press the button，LED light on ；release，LED light off. No.
PAGE 5
9315-1520 Quebec Inc. IndieVice remote Pro Notes： 1 piece of schematic diagram – button battery or lithium battery for choice. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.