User's Manual

Department
9CD 3.0 – User manual
Version 1.00
Internal 3 (7)
Idesco Oy | Teknologiantie 9, FIN-90590 OULU | Tel [phone] | [e-mail] | www.idesco.fi
1. Introduction
9CD 3.0 is a Radio Frequency Identification (RFID) -reader to automatically and uniquely identify and
track inventory and assets. Transponders can be read without line of sight. Read range can be up to
a several centimeters depending on transponder size and shape.
2. Technical Specification
2.1. Operating voltage, power, electrical interfaces
Current consumption is 100 mA max.
Operating voltage range are 10 – 30 VDC.
2.2. Functions and properties
Product description
Reader supports Mifare Classic 13,56 MHz technology. The reader is controlled with serial communi-
cation commands or depending on software it can function independently.
Buzzer
Buzzer is optional. Its controls can be connected to I/O interfaces.
Printed Circuit Board
The reader has 4 mounting holes in the PCB.
2.3. Interfaces
Reader Interface
The reader is equipped with RS232.
Interface output
The reader uses Idesco serial communication protocol.
2.4. Performance
Reading distance
Reading distance up to several centimeters.
Communication
Each command must be preceded by 0x02 and followed by 0x03. Version Query is for example
‘0x02’Q‘0x03’
Command Set