Operating instructions

Fluke 192B - 196B/C - 199B/C
Getting Started
8
Recorder Functions
First, choose a measurement in Scope or Meter mode.
Show the recorder functions. Select a
recorder function, then press to
display the recorder key labels:
Start (RUN) or stop (STOP) recording.
Show the recorder options.
Reference: time reference is time of day
(Time of Day) or time from start (From
Start).
In Scope Record:
Display Glitches: glitch detection on, or
10 kHz filter on.
Mode:  Single Sweep : stores samples
until memory is full, then stops.
Mode:  Continuous : stores samples
continuously; deletes first samples if
memory is full.
Mode:  on Ext. ... : start (Start), stop (Stop)
or continue (Run) recording if triggered via
the meter input (Ext.). Run requires one
trigger per division in VIEW ALL mode.
In Trend Plot:
Reading 1 (2)... (Scope) or Measurement...
(Meter) show the measurement function
menu.
VIEW ALL : see all stored samples.
NORMAL : see the most recent 9 divisions.
EXIT : exit the recorder mode.
Replay
In scope mode, the test tool automatically stores the 100
most recent screens. Use REPLAY to review these screens.
From Scope mode show the REPLAY key
labels.
Step through the previous screen.
Step through the next screens.
Continuously play the stored screens.
Exit the REPLAY mode.