Operating instructions

Fluke 192B - 196B/C - 199B/C
Getting Started
12
User Options
Display the USER key labels.
Open the options menu.
Auto Set Adjust...
Select how auto set (AUTO key) behaves:
 auto set on signals >15 Hz (fast response) or >1 Hz
(slower response).
 set input coupling to DC (Set to DC) or don’t change the
input coupling setting.
 set glitch detection on (Set to On) or don’t change the
glitch detection setting.
Battery Save Options...
When powered on the battery only, the test tool initially
shuts itself down 30 minutes after you pressed a key (not
in Trend Plot or Scope Record).
You can set the automatic power shutdown time to 5
minutes and to 30 minutes, or you can disable the
automatic power shutdown (
Disabled).
Battery refresh
Start a battery refresh about four times a year to keep
the batteries in optimal condition. The batteries will be
fully discharged and charged again.
Date adjust...
Set the date (Year: Month: Day: ) and the date format
(
DD/MM/YY is day- month-year, MM/DD/YY is month-day-
year).
Time Adjust...
Set the time clock (Hours - Minutes - Seconds).
Printer Setup...
Select a printer type and select the baud rate.
Factory default
Clears all memories and sets the test tool to factory
defaults.
Display Options...(C-Versions only)
Set the display to color (Color) or black and white (Black
and White
).