Operating instructions

1
Getting Started
Introduction
This Getting Started Manual provides basic information
on Models 192B, 196B, 196C, 199B and 199C. Refer to
the Users Manual on the accompanying CD-ROM for
complete operating instructions.
Contacting Fluke
To locate an authorized service center, visit us on the
World Wide Web at: www.fluke.com
or call Fluke using any of the phone numbers listed
below:
[phone] in the U.S.A and Canada
[phone] in Europe
[phone] from other countries.
Safety Information: Read First
The Fluke Models 192B, 196B, 196C, 199B and 199C
ScopeMeter test tools (hereafter referred to as “test tool”)
comply with:
• ANSI/ISA S82.01-1994
• EN/IEC61010-1 : 2001
• CAN/CSA-C22.2 No.1010.1-92
• 1000 V Measurement Category II, 600 V
Measurement Category III, Pollution Degree 2
• UL3111-1
Use the test tool only as specified in the Users Manual.
Otherwise, the protection provided by the test tool might
be impaired.
A Warning identifies conditions and actions that pose
hazard(s) to the user. A Caution identifies conditions and
actions that may damage the test tool.