Operating instructions

Getting Started

Changing the Information Language

During operation of the test tool messages may appear on

the screen (for instance if you select a recorder function).

You can select the language in which messages will be

displayed.

Display the USER key labels.

Open the LANGUAGE menu to select a

language.

Adjusting Contrast and Brightness

Display the USER key labels.

Enable the arrow keys for adjustment.

Adjust the contrast of the screen.

Change the backlight brightness.

Using the Scope

Connect the probe(s) as shown in figure 2.

Figure 2. Scope Connections

AUTO- MANUAL ranging

After an Auto Set the trace position, range, time base and

triggering will be automatically adjusted to assure a stable

display of virtually any waveform.

Perform an Auto Set or select Manual

ranging (toggle). AUTO or MANUAL appears

at the top right of the screen.

Use the light-gray RANGE, TIME and MOVE keys to

change the view of the waveform manually.