Scale User Manual

9. The balance re-calculates the unit weight while the ACAI indicator is blinking. Do not

touch the balance or samples on the pan until the ACAI indicator turns off.

10. Counting accuracy is improved when the ACAI indicator turns off. Each time the

above operation is performed, a more accurate unit weight will be obtained. There is

no definite upper limit of ACAI range for the number of samples exceeding 100. Try

to add the similar number of samples as displayed.

5-7. Percent mode (%)

Displays the weighing value in percentage compared to the reference (100%) weight.

Selecting the percent mode

1. Press the UNITS key to select %. (%:percent)

Storing the reference (100%) weight

2. Press the SAMPLE key to enter the

reference weight storing mode.

3. Press the RE-ZERO key to display 100 0%.

4. Place the sample to be set as the reference

weight on the pan.

5. Press the PRINT key to store the reference

weight. Remove the sample.

Reading the percentage

6. Place the object to be compared to the

reference weight on the pan. The displayed

percentage is based on 100% of the reference

weight.

To store

0.0

100 -

100.0

75.8

100 0

ZERO

Weighing pan

Sample corresponding

to the 100% weight

Object to be

compared