Scale User Manual

This manual and Marks

All safety messages are identified by the following, “WARNING” or “CAUTION”, of ANSI

Z535.4 (American National Standard Institute: Product Safety Signs and Labels). The

meanings are as follows:

WARNING

A potentially hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION

A potentially hazardous situation which, if not avoided, may result in

minor or moderate injury.

This is a hazard alert mark.

Note This manual is subject to change without notice at any time to improve the product. No

part of this manual may be photocopied, reproduced, or translated into another language

without the prior written consent of the A&D Company.

Product specifications are subject to change without any obligation on the part of the

manufacture.

Compliance with FCC rules

Please note that this equipment generates, uses and can radiate radio frequency energy.

This equipment has been tested and has been found to comply with the limits of a Class A

computing device pursuant to Subpart J of Part 15 of FCC rules. These rules are

designed to provide reasonable protection against interference when this equipment is

operated in a commercial environment. If this unit is operated in a residential area it might

cause some interference and under these circumstances the user would be required to

take, at his own expense, whatever measures are necessary to eliminate the interference.

(FCC = Federal Communications Commission in the U.S.A.)