Specifications

62
15-2. Changing Password
The password can be changed at "Password (loc no..)" of "10-3. Details Of The Function Table".
1 Press and hold the
SAMPLE key in the weighing mode.
ba5fnc is displayed.
2 Press the SAMPLE key several times until loc no. is displayed.
3 Press the PRINT key to display the current password.
At factory settings, the password is . (the RE-ZERO
key, four times)
4 Set the new password using the following keys.
The balance will turn automatically after no operation
for ten minutes.
MODE key ................ Character
SAMPLE key.............. Character
PRINT key................. Character
RE-ZERO key............ Character
CAL key.................... Back key
5 Input four characters of the new password
using these keys.
6 The balance displays
where
"No" is blinking when "No" is selected.
7 Press the
RE-ZERO key to display
where "YES" is blinking when "YES" is selected.
8 Press the
PRINT key to store the new password
when displaying .
When turning on the balance, input the new password.
Note
If the correct password is missing, the balance can not be used.
Record the correct password after changing.
Press and hold
Press several time
s
Current
p
assword
Exchan
g
e switch
In
p
ut 4 character
s
"No" is selected
"Yes" is selected
Weighing mod
e
Enter ke
y
Enter ke
y
New
p
assword
A
fter no
operation for
10 minute
s
Turned off