Instruction Manual

HV-G/HW-G Series Page 23

7. Basic Operation

7.1. Turning the Scale on/off and Weighing

7.1.1. Type V or Type L with AC Adapter

Step 1 Ground the scale.

Step 2 Confirm that nothing is placed on the pan.

Step 3 Confirm that local voltage and receptacle type are correct.

Step 4 The scale turns on/off using the ON/OFF key alternately.

Step 5 Check the accuracy of weighing. Allow 30-minute warm up before calibration.

Step 6 With nothing on the pan, press the ZERO key to display zero.

Step 7 Place an article to be weighed on the pan gently.

Step 8 Wait for the stability mark to be displayed. Read the weight value.

Step 9 Remove the article from the pan.

Step 10 Turn the scale off using the ON/OFF key.

Memo

With the power cord connected, type V is in standby status after the scale is turned off

using the ON/OFF key. To shut down the power completely, disconnect the power

cord.

With the AC adapter connected, the power is off at the scale, but not from the AC

adapter, after the scale is turned off using the ON/OFF key. To shut down the power

completely, disconnect the AC adapter.