Instruction Manual

HV-G/HW-G Series Page 37

11. Upper/Lower Comparator Function

Function table Description

f6 7

When the weight value becomes stable and not nearly-zero, the

scale compares the value. It does not compare on an unstable

condition.

Caution

The upper limit value (HI) must be greater than the lower limit value (LO).

The parameters of the upper limit value (HI) and the final value (HI) use the

same memory. The parameters of the lower limit value (LO) and the

preliminary value (OK) use the same memory.

The upper/lower comparator function, the simple batch function and the

full/dribble batch function can not be used at the same time because these

parameters use the common memory.

11.1. Preparation (Setting Parameters)

Step 1 Turn off the display.

Press and hold the

ZERO key and press the ON/OFF

key. The function table is displayed.

Step 2 Press the ENTER key to display an item of the

comparator function ( f6 ).

Step 3 Select a parameter of the comparator function

( f6 0 to f6 7 ) with the ∧ key.

Step 4 Press the

ENTER key and the F key to display end .

Press the ENTER key to return to the normal

weighing mode.