Instruction Manual

Page 42 HV-G/HW-G Series
12. Full/Dribble Batch Function
12.1. Preparation (Setting Parameters)
Step 1 Turn off the display.
Press and hold the ZERO key and press the ON/OFF key.
The function table is displayed.
Step 2 Press the ENTER key to display an item of the
comparator function ( f6 ).
Step 3 Select a parameter of the full/dribble batch function
( f6 9 ) with the ∧ key.
Step 4 Press the ENTER key to store the new parameter and
display an item of the full/dribble batch sub-function
( f10 ) .
Step 5 Select a parameter of the full/dribble batch
sub-function ( f10 0 to f10 3 ) with the ∧ key.
Step 6 Press the
ENTER key and the F key to display end .
Step 7 Press the ENTER key to return to the normal weighing
mode.