Instruction Manual

HV-G/HW-G Series Page 43
12. Full/Dribble Batch Function
Step 8 Press the MODE key to display the blinking HI (of the
final value).
Step 9 Set the final value using the following keys.
＜ key Selecting the figure to be changed.
∧ key Changing the number of the figure.
Step 10 Press the ENTER key to store the new parameter and
display the blinking OK (of preliminary value).
Step 11 Set the preliminary value using the following keys.
＜ key Selecting the figure to be changed.
∧ key Changing the number of the figure.
Step 12 Press the ENTER key to store the new parameter and
display the blinking LO (of zero band).
Step 13 Set a zero band which is greater than the tare value,
using the following keys.
＜ key Selecting the figure to be changed.
∧ key Changing the number of the figure.
Step 14 Press the ENTER key to store the new parameter and
return to the normal weighing mode.