Instruction Manual

HV-G/HW-G Series Page 61
16. RS-232C Serial Interface
Preset tare
Tare value is set and the net is displayed.
The set value is a 5 digit numerical value with a polarity sign and does not contain a
decimal point.
Template PT, [parameter]
Command
Reply Net is displayed and the net mark is displayed.
Upper limit value
The upper limit value is stored. The set value is a 5 digit numerical value with a
polarity sign and does not contain a decimal point.
Template HI, [parameter]
Command
Reply The upper limit value is stored.
Caution The upper limit value must be greater than the lower limit value.
Lower limit value
The lower limit value is stored. The set value is a 5 digit numerical value with a polarity
sign and does not contain a decimal point.
Template LO, [parameter]
Command
Reply The lower limit value is stored.
Caution The lower limit value must be less than the upper limit value.
Accumulation data output
Accumulated data is output.
Template A
Command
Reply
Accumulation count output
Number of accumulations is output.
Template N
Command
Reply
Reset of Accumulation data and Accumulation count
Accumulated data and number of accumulations are set to zero.
Template CA
Command
Reply Data and number of accumulations become zero.