User manual BLE module PAPZ7128 BLE module PAPZ7128 User Manual –V1.
Contents 1 Apply.................................................................................................................................. 3 2 Model number .................................................................................................................. 3 3 Overview ........................................................................................................................... 3 4 Specification........................................................................
1 Apply This document is User Manual for PAPZ7128 BLE module. 2 Model number BLE module PAPZ7128 3 Overview This device is the Bluetooth Low Energy module. This module can communicate for Healthcare profile and GATT service. 4 Specification Item Contents Name PAPZ7128 Bluetooth I/F Communication I/F Version 4.2 Profile BLP, WSP, GATT Role Peripheral, Central IC Dialog DA14680 Frequency 2402～2480MHz UART BLE module PAPZ7128 User Manual –V1.
5 FCC Statement FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
If the identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module, such as “Contains FCC ID: KSNPZ7128”. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the multi-transmitter procedures.
ISED Statement ISED Statement: This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, (2) this device must accept any interference, including interference that may cause undesired operation of the device.
