Instruction manual

3
1. INTRODUCTION
This manual describes how the SV-A/SV-H series viscometer works and how to get the most out of it
in terms of performance.
Read this manual thoroughly before using the viscometer and keep it at hand for future reference.
The SV-A series uses a stand. In a laboratory, quality control room etc, you can make accurate
measurements using the stand set, the sample cup set and the software set provided.
The SV-H series uses a handle only. While at a manufacturing location, you can make a
measurement easily. If you buy the accessories, the SV-H series functions the same as the SV-A
series.
1-1 Compliance
Compliance with FCC Rules
Please note that this device generates, uses and can radiate radio frequency energy. This
device has been tested and has been found to comply with the limits of a Class A computing
device pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to provide
reasonable protection against interference when this device is operated in a commercial
environment. If this unit is operated in a residential area, it may cause some interference and
under these circumstances the user would be required to take, at his own expense, whatever
measures are necessary to eliminate the interference.
(FCC = Federal Communications Commission in the U.S.A.)
Compliance with Council Directives
This device features radio interference suppression and safety regulation in compliance with
the following Council Directives
Council directive 89/336/EEC EN61326 EMC directive
Council directive 73/23/EEC EN60950
Safety of Information Technology Equipment
EN61326 Emission and Immunity.
Note
The CE mark is an official mandatory European marking.
Please note that any electronic product must comply with local laws and regulations when
sold or used anywhere outside Europe.