Specifications

9
Key Description
ON/OFF key
Turns the power ON or OFF.
When turned ON, the scale will be automatically set to zero (power-on zero).
To turn the power OFF, press and hold the key.
Note: If pressing the key does not turn the power ON immediately, keep
pressing the key.
SAMPLE key
In the counting mode (“pcs”), goes to the unit weight storing mode.
Press and hold to go to the comparator value setting mode.
PRINT key
Outputs the weight value to the printer.
In the setting mode, this key is used to increase the value of the selected
blinking digit by one.
UNITS key
Switches the weighing unit.
In the setting mode, this key is used to shift the blinking digit to the right.
ZERO key
Zeroes the scale and sets the display to zero.
TARE key
Subtracts the tare (container) weight placed on the weighing pan.
In the setting mode, this key is used to store the setting value and proceed to
the next step.