Digital Blood Pressure Monitor Model UA-774 Instruction Manual Original Manuel d’instructions Traduction Manual de Instrucciones Traducción Manuale di Istruzioni Traduzione 使用手冊 翻譯 1WMPD4000734F
Contents Dear Customers .......................................................................... 1 Preliminary Remarks.................................................................... 1 Precautions ................................................................................. 2 Parts Identification ...................................................................... 3 Symbols ...................................................................................... 4 Using The Monitor.................
Precautions Precision components are used in the construction of this device. Extremes in temperature, humidity, direct sunlight, shock or dust should be avoided. Clean the device and cuff with a dry, soft cloth or a cloth dampened with water and a neutral detergent. Never use alcohol, benzene, thinner or other harsh chemicals to clean the device or cuff. Avoid tightly folding the cuff or storing the hose tightly twisted for long periods, as such treatment may shorten the life of the components.
Parts Identification DC jack Display START 2 button Green illumination START 1 button Orange illumination 1.5V Batteries R6P, LR6, AA Air connector plug Air socket Arm cuff Air hose Proper fit range Index mark Artery position mark Battery cover Battery compartment The START Button Operations Normal measurement with storing data Press the START 1 or START 2 button. Recalling data Press and hold the START 1 or START 2 button. Unrecorded measurement (Guest mode) Press both START buttons.
Symbols Symbols Function / Meaning Recommended Action Standby and Turn the device on. Battery installation guide Direct current Serial number SN Date of manufacture Type BF: Device, cuff and tubing are designed to provide special protection against electrical shocks. The indicator that appears while Measurement is in measurement is in progress. It blinks progress. Remain as still when the pulse is detected. as possible. Irregular Heartbeat indicator. (I.H.B.
Using The Monitor Installing / Changing The Batteries Step 1 1. Slide the battery cover up to open it. 2. Remove the used batteries and insert new batteries into the battery compartment as shown, taking care that the polarities (+) and (-) are correct. 3. Slide the battery cover down to close it. Use only R6P, LR6 or AA batteries. Step 3 Step 2 CAUTION Insert the batteries as shown in the battery compartment. If installed incorrectly, the device will not work.
Using The Monitor Selecting the Correct Cuff Size Using the correct cuff size is important for an accurate reading. If the cuff is not the proper size, the reading may yield an incorrect blood pressure value. The arm size is printed on each cuff. The index and proper fit range, on the cuff, tell you if you are applying the correct cuff. (Refer to "Symbols that are printed on the cuff".) If the index points outside of the range, contact your local dealer to purchase a replacement cuff.
Using The Monitor Applying The Arm Cuff 1. Wrap the cuff around the upper arm, about 1-2 cm above the inside of the elbow, as shown. Place the cuff directly against the skin, as clothing may cause a faint pulse, and result in a measurement error. Do not roll up shirtsleeve tightly Cuff Artery position mark 2. Constriction of the upper arm, caused by tightly rolling up a shirtsleeve, may prevent accurate readings. 3. Confirm that the index within the proper fit range.
Measurements Model UA-774 is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically. If your systolic pressure is expected to exceed 230 mmHg, read "Measurement with the desired systolic pressure" on the next page. Model UA-774 can store the last thirty sets of data for each button. We recommend that if two people regularly use the device, one uses the START 1 button and the other uses START 2 button, to prevent confusion over stored data.
Measurements Measurement With The Desired Systolic Pressure If your systolic pressure is expected to exceed 230 mmHg, use this procedure. 1. Place the cuff on the arm (preferably the left arm). At heart level 2. Press and hold the START 1 (or START 2) button to display the last data number. Press and hold Last data number 3. Press and hold the START 1 (or START 2) button again until a number about 30 to 40 mmHg higher than your expected systolic pressure appears.
Operation Mode 1. Normal measurement with storing data (Refer to page 8) Press the START 1 (or START 2) button. Blood pressure is measured and data is stored within the device. The device can store the last thirty sets of data for each button. We recommend that if two people regularly use the device, one uses the START 1 button and the other uses START 2 button. Recalling data Press and hold the START 1 (or START 2) button to recall the data.
What Is An Irregular Heartbeat? Model UA-774 blood pressure monitor provides a blood pressure and pulse rate measurement even when an irregular heartbeat occurs. An irregular heartbeat is defined as a heartbeat that varies by 25% from the average of all heartbeats during the blood pressure measurement. It is important that you are relaxed, remain still and do not talk during measurements. indicator frequently.
Blood Pressure Variations Blood Pressure An individual’s blood pressure varies greatly on a daily and seasonal basis. It may vary by 30 to 50 mmHg due to various conditions during the day. In hypertensive individuals, variations are even more pronounced. Normally, the blood pressure rises while at work or play and falls to its lowest levels during sleep. So, do not be overly concerned Typical fluctuation within a day (Measured every five minutes) by the results of one measurement.
The value is different from See “Why measure blood that measured at a clinic pressure at home?”. or doctor’s office. Other Remove the batteries. Re-install them properly and try the measurement again. Note: If the actions described above do not solve the problem, contact the dealer. Do not attempt to open or repair this product, as any attempt to do so will make your warranty invalid. Maintenance Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged.
Operating conditions +10°C to +40°C / 15%RH to 85 %RH 800 hPa to 1060 hPa Transport / Storage conditions -10°C to +60°C / 15%RH to 85 %RH Dimensions Approx. 147 [W] x 64 [H] x 110 [D] mm Weight Approx. 300 g, excluding batteries Applied part Cuff Type BF Useful life Device: 5 years (when used six times a day) Cuff: 2 years (when used six times a day) Accessory AC adapter The adapter is to connect the blood pressure monitor to a power source at home.
Asahi 1-243, Kitamoto-shi, Saitama 364-8585, JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LIMITED Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131, U.S.A.