Instruction manual

English 9
Press
Turn off
Year
Month
Day
Hou
r
Minute
Pressure
settin
g
mode
or
or
or
or
or
Using the Monitor
Adjusting the Built-in Clock
Adjust the clock prior to use.
1. Press the SET button until the year starts
blinking.
2. Select the year using the
or button.
Press the SET button to set the current year
and move to month/day selection. The date
can be set anywhere between the years 2010
and 2059.
3. Select the month using the
or button.
Press the SET button to set the current
month and move to day selection.
4. Select the day using the
or button.
Press the SET button to set the current day
and move to hour/minute selection.
5. Select the hour using the
or button.
Press the SET button to set the current hour
and move to minute selection.
6. Select the minute using the
or button.
(Press the SET button to go to the pressure
setting mode. For details, refer to page 12.)
Press the START button to turn the device off.
Note: After three minutes of non-operation, the device
will turn off automatically.
When the clock has not been
set, the clock display indicates
dashes as shown to the right.
Holding down the or button
will change the value continuously.
Selecting the Correct Cuff Size
Using the correct cuff size is important for an accurate reading. If the cuff is not
the proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The arm cuff is a consumable. If it becomes worn, purchase a new one.
Arm Size Recommended Cuff Size Catalog Number
31 cm to 45 cm Large adult cuff
CUF-F-LA
17 cm to 32 cm Adult cuff
CUF-G-A
Arm size: The circumference of the biceps.
Pressing the START
button will turn th
e
device off anytime.